BM23HC-S-31 - Beer dispenser Beverage-Air - Free user manual and instructions
Find the device manual for free BM23HC-S-31 Beverage-Air in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Beer Dispenser |
| Brand | Beverage-Air |
| Model | BM23HC-S-31 |
| Width | 23 inches |
| Depth | 24 inches |
| Height | 32.5 inches |
| Weight | 110 lbs |
| Refrigeration Type | Forced air, self-contained |
| Temperature Range | 34°F to 40°F |
| Keg Capacity | 1 half-barrel or 2 sixth-barrels |
| Number of Taps | 1 |
| Power Supply | 115V / 60Hz / 1.5A |
| Plug Type | NEMA 5-15P |
| Refrigerant | R-290 (NFC) |
| Interior Light | LED |
| Thermostat | Digital, adjustable |
| Defrost | Automatic |
| Wheels/Casters | 4 casters, front locking |
| Door Material | Stainless steel |
| Warranty | 3 years parts/labor, 5 years compressor |
| Certifications | NSF, UL |
| Cleaning Frequency | Weekly drip tray & exterior; monthly interior |
| Safety | Unplug before cleaning; level surface |
Frequently Asked Questions - BM23HC-S-31 Beverage-Air
How do I install the BM23HC-S-31 beer dispenser?
Place the unit on a level, solid surface with adequate ventilation around the sides and back. Plug into a dedicated 115V electrical outlet. Allow the unit to run empty for 24 hours to reach the set temperature before connecting a keg.
What keg sizes fit in this dispenser?
The BM23HC-S-31 accommodates one half-barrel keg (15.5 gallons) or two sixth-barrel kegs (5 gallons each). Always check the specific keg dimensions for compatibility.
How do I clean the beer lines?
Disconnect the keg and use a commercial beer line cleaning kit. Circulate a warm water and cleaner solution through the system using a pump, then flush thoroughly with fresh water. Rinse all components before reconnecting a keg.
What is the ideal serving temperature?
Set the digital thermostat between 34°F and 40°F. The recommended serving temperature for most beers is around 38°F. Adjust based on beer style.
My dispenser is not cooling; what should I check?
Verify the power cord is plugged in and the thermostat is set correctly. Clean the condenser coils if dusty. Ensure there is at least 6 inches of space around the unit for airflow. If problem persists, contact a technician.
Can I use both CO2 and nitrogen?
Yes, the dispenser supports both CO2 and nitrogen. The gas mix depends on the beer type; consult your beer supplier for the correct blend.
How often should I defrost the unit?
The unit features automatic defrost. Manual defrost is rarely needed. If ice builds up, check for door seal issues or overfilling.
Where can I buy replacement parts?
Replacement parts are available through Beverage-Air authorized dealers or the company's website. Common parts include faucets, regulators, and door gaskets.
Does this model comply with ADA requirements?
The BM23HC-S-31 may not be fully ADA compliant by itself. For ADA compliance, the unit must be installed on a counter no higher than 34 inches with knee clearance underneath.
What is the warranty on this unit?
Beverage-Air provides a 3-year warranty on parts and labor and a 5-year warranty on the compressor. Registration is recommended to activate the warranty.
User questions about BM23HC-S-31 Beverage-Air
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Beer dispenser in PDF format for free! Find your manual BM23HC-S-31 - Beverage-Air and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BM23HC-S-31 by Beverage-Air.
USER MANUAL BM23HC-S-31 Beverage-Air
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Beverage-Air
Model : BM23HC-S-31
Category : Beer dispenser