AJP100E-RM - Polisher Sun Joe - Free user manual and instructions
Find the device manual for free AJP100E-RM Sun Joe in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Polisher / Buffer |
| Brand | Sun Joe |
| Model | AJP100E-RM |
| Power Supply | 120V ~ 60Hz, 10A |
| Motor | High-torque 10-amp motor |
| Speed Range | Variable speed, 1500-3500 RPM |
| Speed Control | Trigger switch with lock-on |
| Backing Pad Size | 7 inches (178 mm) |
| Arbor Thread | 5/16 inch - 24 UNC |
| Weight | 5.5 lbs (2.5 kg) |
| Dimensions (L x W x H) | 12.5 x 6.3 x 5.2 inches (31.8 x 16 x 13.2 cm) |
| Cord Length | 8 feet (2.4 m) |
| Housing Material | High-impact plastic with rubber grip |
| Application | Waxing, buffing, polishing, and sealing |
| Safety Features | Double insulated, safety trigger, lock-off button |
| Maintenance | Clean housing with dry cloth; inspect carbon brushes periodically |
| Included Accessories | 7-inch backing pad, two bonnets (wool and foam) |
| Recommended Bonnets | Microfiber, polishing, cutting (sold separately) |
| Noise Level | 85 dB (A) at full load |
| Warranty | 2-year limited warranty |
Frequently Asked Questions - AJP100E-RM Sun Joe
What is the Sun Joe AJP100E-RM used for?
The Sun Joe AJP100E-RM is a polisher/buffer designed for waxing, buffing, polishing, and sealing automotive paint and other smooth surfaces.
How do I adjust the speed on the AJP100E-RM?
The speed is controlled by the variable-speed trigger. Press the trigger lightly for lower speeds and squeeze more firmly for higher speeds (1500-3500 RPM). Use the lock-on button for continuous operation.
What size backing pad does it use?
It uses a 7-inch (178 mm) backing pad with a 5/16-24 UNC arbor thread.
Can I use this polisher for wet sanding?
No, the AJP100E-RM is not designed for wet sanding. It is intended for dry polishing and waxing applications only.
How do I change the bonnet?
First, unplug the polisher. Press the spindle lock button and rotate the backing pad until it locks. Then unscrew the pad counterclockwise. Remove the old bonnet, attach a new one with the hook-and-loop system, and reattach the pad.
Is the tool double insulated?
Yes, the AJP100E-RM is double insulated, which means it does not require a grounding cord. Use only an extension cord rated for outdoor use.
What maintenance is required?
Regularly clean the housing with a dry cloth. Check carbon brushes after 50 hours of use and replace if worn. Lubricate the gear case periodically per the manual.
Can I use third-party bonnets?
Yes, any 7-inch hook-and-loop bonnet compatible with a 5/16-24 arbor can be used. Ensure it is rated for high-speed use.
What safety precautions should I take?
Always wear safety goggles and a dust mask. Keep the cord away from the spinning pad. Do not operate in wet conditions. Disconnect power when changing accessories.
Why is my polisher vibrating excessively?
Excessive vibration may indicate an unbalanced backing pad, a worn bonnet, or debris stuck in the pad. Inspect and clean the pad. If the issue persists, check for damaged bearings.
User questions about AJP100E-RM Sun Joe
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Polisher in PDF format for free! Find your manual AJP100E-RM - Sun Joe and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AJP100E-RM by Sun Joe.
USER MANUAL AJP100E-RM Sun Joe
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Sun Joe
Model : AJP100E-RM
Category : Polisher