M3104E1B4 - Security Camera FLIR - Free user manual and instructions
Find the device manual for free M3104E1B4 FLIR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera (Fixed Dome) |
| Brand | FLIR |
| Model | M3104E1B4 |
| Dimensions (D x H) | 5.1 in x 4.3 in (130 mm x 110 mm) |
| Weight | 1.2 lb (0.54 kg) |
| Power Supply | PoE (Power over Ethernet) IEEE 802.3af or 12V DC |
| Power Consumption | Max 8 W |
| Image Sensor | 1/2.8" Progressive Scan CMOS |
| Resolution | 4 MP (2688 x 1520) |
| Lens | 2.8 mm fixed, F2.0 |
| Night Vision | Up to 100 ft (30 m) with IR LEDs |
| Field of View | Horizontal 106°, Vertical 58°, Diagonal 127° |
| Video Compression | H.265+/H.265/H.264+/H.264 |
| Weather Rating | IP67 (dust and water resistant) |
| Operating Temperature | -22°F to 140°F (-30°C to 60°C) |
| Storage | MicroSD slot (up to 256 GB) or NVR |
| Audio | Built-in microphone and speaker |
| Mounting | Ceiling or wall mount (included) |
| Maintenance | Clean lens with soft, dry cloth; avoid solvents |
| Safety | Ensure secure mounting to prevent falls; use proper voltage |
| Spare Parts & Repairability | No user-serviceable parts; contact FLIR support for repairs |
| Compliance | FCC, CE, RoHS |
Frequently Asked Questions - M3104E1B4 FLIR
How do I reset the camera to factory defaults?
Press and hold the reset button on the camera for 10 seconds using a paperclip. The camera will reboot and restore default settings.
Can I use this camera outdoors?
Yes, the camera has an IP67 rating, meaning it is dust-tight and can withstand rain, snow, and direct water jets.
What is the maximum microSD card capacity supported?
The camera supports microSD cards up to 256 GB (Class 10 or UHS-I recommended).
How do I access the camera remotely?
Connect the camera to your network via PoE, install the FLIR app (cloud service), or access it directly via web browser using the camera's IP address.
Does the camera support power over Ethernet (PoE)?
Yes, the camera supports PoE (IEEE 802.3af). Use a PoE switch or injector for both data and power over a single Ethernet cable.
How do I update the firmware?
Download the latest firmware from the FLIR support website, log into the camera's web interface, and upload the firmware file under the maintenance section.
What is the field of view?
The camera has a fixed 2.8 mm lens providing a horizontal field of view of 106°, vertical of 58°, and diagonal of 127°.
Can I record video without an NVR?
Yes, you can insert a microSD card into the camera for local recording. The camera supports continuous, motion, and scheduled recording.
How do I set up motion detection?
In the camera's web interface, navigate to Event > Motion Detection. Enable it, draw detection areas, and set sensitivity. You can also configure email alerts or FTP upload.
What should I do if the camera is not showing any image?
Check the PoE connection, ensure the camera is receiving power, and verify that the IP address is correctly configured. You may need to reset the camera or use the FLIR Discovery Tool to find it on the network.
User questions about M3104E1B4 FLIR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual M3104E1B4 - FLIR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M3104E1B4 by FLIR.
USER MANUAL M3104E1B4 FLIR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FLIR
Model : M3104E1B4
Category : Security Camera