Speco Technologies

VLB1TW - Security Camera Speco Technologies - Free user manual and instructions

Find the device manual for free VLB1TW Speco Technologies in PDF.

📄 9 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Speco Technologies VLB1TW - page 5
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Security Camera
Brand Speco Technologies
Model VLB1TW
Image Sensor 1/2.8" CMOS
Resolution 1920 x 1080 (Full HD)
Lens Fixed 2.8mm, wide angle
Night Vision Up to 30m with IR LEDs
Power Supply DC 12V, 1A (included adapter)
Power Consumption 5W (max)
Dimensions (W x H x L) 70 x 70 x 150 mm
Weight 450 g
Mounting Type Wall or ceiling mount
Weather Rating IP66 (outdoor use)
Storage Micro SD card up to 128 GB (not included)
Video Output BNC analog or CVBS
Main Features Motion detection, wide dynamic range, privacy masking
Cleaning Wipe with dry cloth; avoid solvents
Safety Use only with specified adapter; keep away from water
Spare Parts Contact Speco support for mounting brackets, cables
Repairability No user-serviceable parts; professional repair required

Frequently Asked Questions - VLB1TW Speco Technologies

How do I reset the camera to factory defaults?
Press and hold the reset button (small pinhole) on the camera for 10 seconds using a paper clip. The camera will reboot with default settings.
What type of power supply does the VLB1TW require?
The camera requires a 12V DC power supply with a minimum current of 1A. Use only the included adapter.
Can I use this camera outdoors?
Yes, the VLB1TW has an IP66 weather rating, making it suitable for outdoor use in rain and dust.
How do I connect the camera to my DVR?
Connect the camera's BNC video output to a compatible analog DVR using a coaxial cable. Also connect the power adapter.
What is the maximum resolution supported?
The camera supports 1920x1080 pixels (Full HD) at 30 frames per second.
Does the camera have night vision?
Yes, it features infrared LEDs for night vision up to 30 meters in total darkness.
How do I adjust the camera angle?
Loosen the adjustment screws on the bracket, tilt and rotate the camera to the desired position, then tighten the screws.
What memory card does it support?
It supports Micro SD cards up to 128 GB (Class 10 or higher) for local recording.
How often should I clean the camera lens?
Clean the lens every 3-6 months with a soft, dry cloth. Avoid liquids or abrasive materials.
What should I do if the camera image is blurry?
Check if the lens is clean and the focus ring is properly adjusted. Also ensure the camera is not obstructed by dirt or spider webs.

User questions about VLB1TW Speco Technologies

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Security Camera in PDF format for free! Find your manual VLB1TW - Speco Technologies and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VLB1TW by Speco Technologies.

USER MANUAL VLB1TW Speco Technologies

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Speco Technologies

Model : VLB1TW

Category : Security Camera