Loopa - Microphone Sonuus - Free user manual and instructions
Find the device manual for free Loopa Sonuus in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of Product | USB Microphone with Loop Effects |
| Brand | Sonuus |
| Model | Loopa |
| Dimensions (H x D) | 160 mm x 50 mm |
| Weight | 300 g |
| Power Supply | USB 5V DC (USB-A to Micro-USB cable included) |
| Polar Pattern | Cardioid |
| Frequency Response | 20 Hz - 20 kHz |
| Sample Rate | 48 kHz / 16-bit |
| Built-in Effects | Loop Recording, Overdub, Undo, Redo |
| Control Interface | Single Button for Record/Play/Overdub, Knob for Volume |
| Connectivity | USB-C (for device connection), 3.5mm headphone jack |
| Compatibility | Windows, macOS, iOS, Android (with OTG adapter) |
| Included Accessories | User manual, USB cable, Windscreen |
| Material | Metal body with rubberized finish |
| LED Indicator | Multi-color LED for status (Recording, Playback, Overdub) |
| Cleaning | Wipe with a soft dry cloth. Do not use liquids or abrasives. |
| Safety | Do not disassemble. Avoid exposure to moisture. Keep away from magnets. |
| Reparability | Designed for easy repair. Replacement parts available via Sonuus support. |
| Warranty | 1-year limited warranty |
Frequently Asked Questions - Loopa Sonuus
How do I connect the Sonuus Loopa to my computer?
Use the included USB cable to connect the Loopa to a USB port on your computer. It will be recognized as an audio device without additional drivers.
Can I use the Loopa with my smartphone?
Yes, the Loopa works with smartphones via an OTG adapter (not included). Connect the adapter to your phone and then plug in the USB cable.
How do I create a loop?
Press the button once to start recording. Press again to stop and begin playback. Press again to overdub. Long press to undo/redo layers.
The LED is not turning on. What should I do?
Ensure the device is properly connected via USB. If using a battery-powered USB port, check that the device has enough power. Try a different USB port or cable.
Can I use headphones with the Loopa?
Yes, the Loopa has a 3.5mm headphone jack for private monitoring. Plug in your headphones and adjust volume using the knob.
What is the maximum loop length?
The maximum loop length is 5 minutes per layer, with unlimited overdubs.
Does the Loopa require drivers?
No, the Loopa is class-compliant and works without drivers on Windows, macOS, iOS, and Android.
How do I clean the Loopa?
Wipe the exterior with a soft, dry cloth. For the grille, use a soft brush. Avoid moisture and solvents.
Can I use the Loopa without a computer?
The Loopa requires a USB power source to operate. It can be used with a USB power bank for portable operation.
How do I reset the Loopa to factory settings?
Hold the button while plugging the USB cable into the device. The LED will flash three times, indicating a reset.
User questions about Loopa Sonuus
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microphone in PDF format for free! Find your manual Loopa - Sonuus and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Loopa by Sonuus.
USER MANUAL Loopa Sonuus
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Sonuus
Model : Loopa
Category : Microphone