TruFlat 20F511T - Television RCA - Free user manual and instructions
Find the device manual for free TruFlat 20F511T RCA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Television |
| Brand | RCA |
| Model | TruFlat 20F511T |
| Screen Size | 20 inches (diagonal) |
| Display Technology | CRT (Cathode Ray Tube) with flat screen |
| Aspect Ratio | 4:3 |
| Resolution | 640 x 480 pixels (typical SD) |
| Inputs | RF antenna, Composite video (RCA), S-Video, Component video (Y/Pb/Pr) |
| Outputs | Audio out (RCA), Headphone jack |
| Audio | Built-in stereo speakers, 2 x 5W |
| Power Supply | AC 120V, 60Hz, 120W |
| Dimensions (W x H x D) | 20.5 x 18 x 18 inches |
| Weight | Approximately 40 lbs (18 kg) |
| Remote Control | Included with batteries |
| Special Features | Closed captioning, Sleep timer, V-chip parental controls |
| Safety | UL listed, CSA certified |
| Cleaning | Wipe with a soft dry cloth; do not use liquids |
| Repairability | Serviceable by qualified technician; replacement parts available |
Frequently Asked Questions - TruFlat 20F511T RCA
How do I connect cable or antenna to the RCA TruFlat 20F511T?
Connect the coaxial cable from your cable outlet or antenna to the RF IN jack on the back of the TV. Use the INPUT button to select 'TV' or 'Antenna' mode.
Why is there no picture but sound works?
Check that the INPUT source is set correctly. If using a connected device, ensure it is powered on and the cables are secure. Also verify the Brightness and Contrast settings are not turned all the way down.
How do I set up parental controls (V-chip)?
Press the MENU button, navigate to Parental Controls or V-Chip, and enter your password (default is often 0000). You can then block programs based on ratings (TV-MA, PG-13, etc.).
Can I use this TV as a computer monitor?
Yes, the TV has a VGA input (if available) or you can use an HDMI-to-RCA converter for older computers. The maximum resolution supported is 640x480.
How do I clean the screen?
Use a soft, dry microfiber cloth to gently wipe the screen. Do not apply any liquids, sprays, or abrasive cleaners. For stubborn smudges, slightly dampen the cloth with water and wring it out well.
What is the sleep timer and how do I set it?
The Sleep Timer automatically turns off the TV after a set time. Press the SLEEP button on the remote repeatedly to cycle through 15, 30, 60, 90, and 120 minutes. The countdown will appear on screen.
Why does the TV make a high-pitched noise?
A faint high-pitched hum is normal for CRT televisions due to the electron beam scanning. If it is loud, ensure the TV is on a stable surface and not near other electronics. This is not a defect.
How do I connect external speakers?
Use the AUDIO OUT jacks (RCA red/white) on the back of the TV to connect to an external amplifier or powered speakers. Note that connecting external speakers will mute the TV's internal speakers.
What should I do if the remote control stops working?
First, replace the AA batteries in the remote. Check that nothing is blocking the IR sensor on the TV. If it still doesn't work, you can use the control panel on the front of the TV to access basic functions.
Is this TV HD compatible?
No, the RCA TruFlat 20F511T is a standard definition (SD) CRT TV. It can display 480i signals. For high definition, you would need an HDTV. However, you can connect an HD source via composite or S-Video, but it will be downscaled to SD.
User questions about TruFlat 20F511T RCA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Television in PDF format for free! Find your manual TruFlat 20F511T - RCA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TruFlat 20F511T by RCA.