G-Max 200 - Effects machine Blizzard - Free user manual and instructions
Find the device manual for free G-Max 200 Blizzard in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Effects Machine (Fog Machine) |
| Dimensions (W x D x H) | Approx. 35 x 20 x 15 cm (13.8 x 7.9 x 5.9 in) |
| Weight | Approx. 6.5 kg (14.3 lb) |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Power Consumption | 1500 W |
| Fluid Capacity | 2.5 L |
| Heating Time | Approx. 3 minutes |
| Output (Fog Volume) | Up to 200 m³/min |
| Main Functions | High-output fog production, remote control included, adjustable output, low fluid indicator |
| Control Method | Wired remote control (included), optional DMX |
| Safety Features | Thermal cut-off, auto shut-off when fluid level is low, overheat protection |
| Recommended Fluid | Blizzard brand water-based fog fluid |
| Cleaning and Maintenance | Regular cleaning of fluid tank and nozzle; use distilled water for flushing; descale periodically |
| Spare Parts / Repairability | Replacement fluid tank, remote control, heater element, fuse; user-replaceable parts |
| General Information | Brand: Blizzard, Model: G-Max 200, Category: Effects Machine; suitable for small to medium venues |
Frequently Asked Questions - G-Max 200 Blizzard
What type of fluid should I use with the Blizzard G-Max 200?
Use only Blizzard brand water-based fog fluid. Using other fluids may damage the machine and void the warranty.
How do I clean the G-Max 200 fog machine?
After each use, run a mixture of distilled water and Blizzard cleaning solution through the machine. Empty the remaining fluid from the tank and clean the exterior with a damp cloth. Refer to the manual for detailed cleaning instructions.
How long does the G-Max 200 take to heat up?
The heating time is approximately 3 minutes. The indicator light will show when the machine is ready.
Can I control the G-Max 200 with DMX?
Yes, the G-Max 200 supports DMX control (optional). You need a DMX controller and cable. The machine uses a 3-pin XLR connector. Refer to the DMX section in the manual.
What does the low fluid indicator mean?
When the low fluid indicator lights up, the fluid level is low. Refill the tank with Blizzard fog fluid to continue operation. Running the machine dry may damage the pump.
How do I replace the fuse in the G-Max 200?
Disconnect the machine from power. The fuse holder is located next to the power input. Use a small flathead screwdriver to open the holder. Replace with a 5A (250V) slow-blow fuse of the same type.
Why is my G-Max 200 not producing fog?
First, check if the machine is heated (green light). If not, wait for heating. Check fluid level and ensure the tank is properly seated. Also verify the remote control connection. If the pump doesn't activate, it may be clogged or faulty. Contact support.
Is the G-Max 200 safe to use indoors?
Yes, with proper ventilation. Fog machines can set off smoke detectors. Avoid directing fog directly at detectors. Ensure the area is well-ventilated and follow local fire safety regulations.
Can I use the G-Max 200 without the remote control?
No, the machine requires the remote control to operate. The remote is wired and connects via the control port. If lost, contact Blizzard for a replacement.
What is the warranty period for the G-Max 200?
Blizzard offers a 1-year limited warranty from the date of purchase against defects in materials and workmanship. Warranty does not cover misuse, normal wear, or use of non-approved fluids.
User questions about G-Max 200 Blizzard
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Effects machine in PDF format for free! Find your manual G-Max 200 - Blizzard and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. G-Max 200 by Blizzard.