WCD-110SS - Water dispenser NewAir - Free user manual and instructions
Find the device manual for free WCD-110SS NewAir in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bottom-Load Water Dispenser |
| Brand | NewAir |
| Model | WCD-110SS |
| Dimensions (W x D x H) | 13 x 12 x 38 inches |
| Weight | 25 lbs |
| Power Supply | 120V, 60Hz, 550W |
| Water Capacity | Accepts 3-5 gallon bottles |
| Hot Water Temperature | 185°F - 195°F (adjustable) |
| Cold Water Temperature | 40°F - 50°F |
| Dispensing Buttons | Hot, Cold, Room temperature (optional) |
| Child Safety Lock | Yes, for hot water faucet |
| Automatic Shut-off | Yes, for heating and cooling |
| Drip Tray | Removable, easy to clean |
| Cleaning Instructions | Wipe exterior with damp cloth; descale interior every 3 months |
| Filter Required | No internal filter; water source is from bottled water |
| Noise Level | Less than 45 dB |
| Certifications | UL, ETL, NSF (if applicable) |
| Warranty | 1 year limited |
Frequently Asked Questions - WCD-110SS NewAir
How do I install the water bottle?
Open the bottom door, slide the full bottle onto the base, and ensure the probe is inserted into the bottle. Close the door securely.
How do I clean the water dispenser?
Unplug the unit. Remove the drip tray and wash with warm soapy water. Wipe the exterior with a damp cloth. For descaling, run a vinegar solution through the system every 3 months.
Why is the dispenser not heating water?
Ensure the unit is plugged in and the hot water switch is turned on. Check for a tripped circuit breaker. If still not heating, the heating element may need replacement.
Can I use tap water in the dispenser?
No, this model is designed for use with 3-5 gallon bottled water only. Using tap water may cause mineral buildup and damage the unit.
How long does it take to heat or cool water?
Initial heating takes about 15-20 minutes; cooling takes about 30-40 minutes. Subsequent dispensing is faster due to thermostat maintenance.
What does the child safety lock do?
The child safety lock prevents accidental dispensing of hot water. Press and hold the lock button while pressing the hot water button to activate.
Why is water not dispensing?
Check if the water bottle is empty or if the probe is not properly inserted. Also ensure the drip tray is not full causing a blockage.
How do I adjust the hot water temperature?
The hot water temperature is preset and not adjustable on this model. It operates between 185°F and 195°F.
Is there a noise coming from the dispenser?
Some humming or gurgling is normal during cooling or heating cycles. If loud, ensure the unit is level and not vibrating against a wall.
How often should I replace the drip tray?
The drip tray is reusable and only needs replacement if cracked or damaged. Clean it weekly to prevent mold.
User questions about WCD-110SS NewAir
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water dispenser in PDF format for free! Find your manual WCD-110SS - NewAir and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WCD-110SS by NewAir.
USER MANUAL WCD-110SS NewAir
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NewAir
Model : WCD-110SS
Category : Water dispenser