HL-EX470W - Printer BROTHER - Free user manual and instructions
Find the device manual for free HL-EX470W BROTHER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Monochrome Laser Printer |
| Dimensions (W x D x H) | 385 x 255 x 245 mm |
| Weight | 7.5 kg |
| Power Supply | AC 220-240V, 50/60Hz |
| Print Speed | Up to 28 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Connectivity | USB 2.0, Wi-Fi 802.11b/g/n |
| Mobile Printing | Brother iPrint&Scan, AirPrint, Mopria |
| Paper Capacity | 250 sheets (standard tray), 1 sheet manual feed |
| Duplex Printing | Automatic |
| Supported Media Sizes | A4, Letter, Legal, Executive, A5, A6 |
| Toner Cartridge | TN-351 (approx. 2,000 pages) |
| Drum Unit | DR-351 (approx. 15,000 pages) |
| Monthly Duty Cycle | Up to 15,000 pages |
| Noise Level | Printing: 51 dB(A), Standby: 30 dB(A) |
| Power Consumption | Printing: 460 W, Standby: 60 W, Sleep: 1.5 W |
| Operating Temperature | 10°C to 32.5°C |
| Operating Humidity | 20% to 80% RH |
| Maintenance | Clean drum and roller regularly; replace toner/drum as needed |
| Safety | Auto shut-off, CE certified |
| Repairability | User-replaceable toner and drum; service manual available |
Frequently Asked Questions - HL-EX470W BROTHER
How do I connect the HL-EX470W to Wi-Fi?
Press the Menu button on the printer, navigate to Network > WLAN > Setup Wizard. Select your SSID, enter the password, and confirm.
What should I do if the printer is not picking up paper?
Check the paper tray: ensure paper is loaded correctly, not wrinkled, and that the guides are set properly. Also, clean the pickup roller with a lint-free cloth slightly dampened with water.
How do I replace the toner cartridge?
Open the front cover, pull the drum unit out. Push the green lock lever to release the old toner, insert the new TN-351 cartridge, reinstall the drum unit, and close the cover. The printer will reset automatically.
Why is the print quality poor (streaks or faded areas)?
First, run a cleaning cycle from the printer menu. If the issue persists, the DR-351 drum unit may need replacement. Also, check that the toner cartridge is properly seated.
Can I print from my smartphone?
Yes, use the Brother iPrint&Scan app (available for iOS and Android). Ensure the printer and phone are on the same Wi-Fi network. You can also use AirPrint for Apple devices or Mopria for Android.
How do I perform a factory reset?
Turn off the printer, then press and hold the Go button while turning it on. Release the button when all LEDs light up. The printer will reset to factory defaults.
What is the recommended paper type?
Use plain paper (60-105 g/m²) for best results. Labels, envelopes, and thicker paper can be fed through the manual feed slot. Avoid glossy or coated paper.
How do I install the printer driver on Windows?
Download the full driver package from Brother's support site. Run the installer and follow the on-screen instructions. Choose Wireless Network Connection and select your printer when prompted.
The printer displays 'Toner Low' but I just replaced it. What now?
Remove and reinstall the toner cartridge and drum unit. Ensure the orange protective seal is removed from the new toner. If the message persists, reset the toner counter by pressing Clear/Back for 2 seconds.
Where can I find the service manual?
The service manual is available for download on Brother's official website under Support > Printers > HL-EX470W. You can also find third-party manuals on notice-facile.com.
User questions about HL-EX470W BROTHER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual HL-EX470W - BROTHER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HL-EX470W by BROTHER.