RSE1S35BN - Water heater Rinnai - Free user manual and instructions
Find the device manual for free RSE1S35BN Rinnai in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Gas Tankless Water Heater |
| Brand | Rinnai |
| Model | RSE1S35BN |
| Energy Source | Natural Gas (convertible to LPG) |
| Input Rating | 35 kW (119,000 BTU/h) |
| Flow Rate | Up to 7.5 GPM at 35°F temperature rise |
| Efficiency | Up to 0.82 Energy Factor |
| Dimensions (H x W x D) | 600 x 370 x 240 mm |
| Weight | 33 kg |
| Power Supply | 120 V / 60 Hz / 1 A |
| Ignition | Electronic ignition |
| Venting | Direct vent (PVC) |
| Warranty | 5 years heat exchanger, 2 years parts |
| Certifications | CSA, ANSI |
| Control | Digital temperature control with remote |
| Includes | Remote control, mounting bracket |
| Maintenance | Annual descaling recommended |
| Safety | Overheat protection, freeze protection |
| Repairability | Replaceable parts available |
| General Information | Wall-mounted, indoor/outdoor optional |
Frequently Asked Questions - RSE1S35BN Rinnai
How do I install the Rinnai RSE1S35BN water heater?
Installation must be performed by a qualified professional. Ensure the unit is mounted on a sturdy wall with proper venting and gas supply. Refer to the manual for detailed clearances and gas pressure requirements.
What does error code 11 mean on my Rinnai RSE1S35BN?
Error code 11 typically indicates ignition failure. Check that gas supply is on, and the unit is properly grounded. If the issue persists, contact a technician.
How often should I flush the water heater?
Annual descaling is recommended to remove mineral buildup. Use a descaling solution and follow the flushing procedure in the manual to maintain efficiency.
Can I convert the RSE1S35BN from natural gas to propane?
Yes, conversion is possible with a conversion kit. Consult the manual for the specific kit model and have a professional perform the conversion.
What is the maximum flow rate of the RSE1S35BN?
The maximum flow rate is up to 7.5 GPM at a 35°F temperature rise. Actual flow depends on inlet water temperature and desired output.
How do I adjust the temperature on my Rinnai water heater?
Use the included remote control or the digital panel on the unit. Press the temperature buttons to set desired hot water temperature between 98°F and 140°F.
Why is my water heater not heating water?
Check if the unit has power, gas supply is on, and no error codes are displayed. Also ensure water flow is sufficient to activate the heater. Refer to troubleshooting section in the manual.
What are the dimensions of the RSE1S35BN?
The dimensions are approximately 600 mm H x 370 mm W x 240 mm D. Allow for clearance per the manual for servicing.
Does the RSE1S35BN need a power source?
Yes, it requires a 120 V / 60 Hz electrical supply for the control board and ignition system. Plug into a standard outlet with proper grounding.
How can I clean the air filter?
Locate the air filter on the unit, remove it, and clean with a vacuum or mild soap and water. Ensure it is dry before reinstalling. Check monthly for optimal combustion efficiency.
User questions about RSE1S35BN Rinnai
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual RSE1S35BN - Rinnai and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RSE1S35BN by Rinnai.
USER MANUAL RSE1S35BN Rinnai
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Rinnai
Model : RSE1S35BN
Category : Water heater