IPS02-B15-OI03 - Security Camera Illustra - Free user manual and instructions
Find the device manual for free IPS02-B15-OI03 Illustra in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Security Camera |
| Brand | Illustra |
| Model | IPS02-B15-OI03 |
| Category | Security Camera |
| Dimensions (W x H x D) | 100 x 70 x 70 mm |
| Weight | 300 g |
| Power Supply | PoE (IEEE 802.3af) or 12V DC |
| Power Consumption | 5.5 W max |
| Resolution | 1920 x 1080 (Full HD) |
| Frame Rate | 30 fps |
| Night Vision | IR LEDs, up to 30 m |
| Lens | 3.6 mm fixed |
| Field of View | 80° horizontal |
| Weather Rating | IP67 (indoor/outdoor) |
| Video Compression | H.265 / H.264 |
| Motion Detection | Yes, configurable area |
| Audio | Two-way audio (built-in mic and speaker) |
| Network Interface | 10/100 Base-T Ethernet (RJ45) |
| Memory Card Slot | MicroSD up to 128 GB |
| Compliance | CE, FCC, RoHS |
| Maintenance & Cleaning | Wipe with dry cloth; avoid solvents |
| Safety Features | Secure boot, encrypted video stream |
| Spare Parts & Repairability | Contact authorized service center; no user-serviceable parts inside |
| General Information | Outdoor/indoor dome camera, vandal-resistant |
Frequently Asked Questions - IPS02-B15-OI03 Illustra
How do I reset the Illustra IPS02-B15-OI03 to factory defaults?
Press and hold the reset button (located on the cable or under the dome) for 10 seconds using a paperclip while the camera is powered on. The camera will reboot with default settings.
What is the maximum microSD card size supported?
The camera supports microSD cards up to 128 GB for local storage. Use a Class 10 or higher card for best performance.
Can I use this camera outdoors without additional housing?
Yes, the IPS02-B15-OI03 has an IP67 rating, meaning it is dust-tight and protected against temporary immersion in water. It can be used directly outdoors.
How do I access the camera remotely?
After connecting the camera to your network via PoE or power, use the Illustra web interface or a compatible VMS software. Default IP is obtained via DHCP; check your router for the assigned IP. Then log in using the default credentials (admin / admin) or as specified in the manual.
Does the camera support two-way audio?
Yes, it has a built-in microphone and speaker, allowing bidirectional communication. Ensure that audio is enabled in the settings.
What power supply do I need if I don't use PoE?
If PoE is not available, you can power the camera with a 12V DC power supply (not included). The power input is located on the pigtail cable. Use a power adapter with at least 1A output.
How do I update the firmware?
Download the latest firmware from the official Illustra support website. In the camera's web interface, go to Maintenance > Firmware Upgrade, select the file, and click Upgrade. Do not power off during the process.
What is the default username and password?
The default username is admin and the default password is admin (or blank, depending on firmware version). It is strongly recommended to change the password after first login.
Can I mount the camera on a ceiling or wall?
Yes. The camera comes with a mounting bracket and screws. You can mount it on a ceiling or wall. Ensure the surface is solid and use the included template for drilling holes. Route the cable through the base to avoid exposure.
How do I enable motion detection alerts?
In the camera's web interface, go to Events > Motion Detection. Enable motion detection, draw the detection zone, and configure the sensitivity. Then set up the action (e.g., send email, record to SD card) in the Events > Actions section.
User questions about IPS02-B15-OI03 Illustra
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual IPS02-B15-OI03 - Illustra and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IPS02-B15-OI03 by Illustra.