GigaX 1124i - Router ASUS - Free user manual and instructions
Find the device manual for free GigaX 1124i ASUS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit Ethernet Switch |
| Model | GigaX 1124i |
| Brand | ASUS |
| Ports | 24 x 10/100/1000 Mbps RJ-45 |
| Dimensions (W x D x H) | 440 x 200 x 44 mm (19-inch rackmount) |
| Weight | 2.5 kg |
| Power Supply | 100-240V AC, 50-60 Hz, internal power adapter |
| Power Consumption | Max 25W |
| Management | Web-based, SNMP v1/v2c, Telnet, CLI |
| VLAN Support | 802.1Q VLAN, up to 256 groups |
| Quality of Service (QoS) | 802.1p, Traffic priority |
| MAC Address Table | 8K entries |
| Switching Capacity | 48 Gbps |
| Forwarding Rate | 35.7 Mpps (64-byte packets) |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10°C to 70°C |
| Humidity (Operating) | 10% to 90% non-condensing |
| Cooling | Fanless design |
| Mounting | Rackmountable (19-inch brackets included) |
| LED Indicators | Power, Port Link/Activity, Speed |
| Safety Certifications | CE, FCC, UL |
| Maintenance | Clean with dry cloth; no liquid contact |
| Accessories Included | Power cord, rackmount kit, quick start guide |
Frequently Asked Questions - GigaX 1124i ASUS
How do I reset the GigaX 1124i to factory defaults?
Press and hold the Reset button on the front panel for at least 10 seconds using a paperclip. The device will reboot and restore factory settings.
What is the default IP address and login credentials?
The default IP address is 192.168.1.1. The default username is admin and password is admin (all lowercase).
Can I manage the switch via web browser?
Yes, after connecting to the same network, open a browser and enter the switch's IP address. You will see the web management interface for configuration.
How do I enable VLANs on the switch?
Log in to the web interface, go to VLAN settings, and create 802.1Q VLAN groups. Assign ports to VLANs and set the PVID for each port.
Why are some ports not working?
Check the LED indicators on the front panel. If the link LED is off, ensure the cable is properly connected and the device at the other end is powered on. Also verify that the port is not disabled in the management settings.
What is the maximum cable length for Gigabit Ethernet?
For Cat5e or better cables, the maximum distance is 100 meters (328 feet).
Does the GigaX 1124i support PoE?
No, this model does not support Power over Ethernet. It only provides data connectivity.
How can I update the firmware?
Download the latest firmware from the ASUS support website. In the web interface, go to Maintenance > Firmware Upgrade and upload the file. Do not power off during upgrade.
Can I use the switch in a stack?
The GigaX 1124i does not support stacking. It operates as a standalone switch.
What safety precautions should I take?
Place the switch in a well-ventilated area away from moisture. Do not block the cooling vents. Only use the supplied power adapter. Disconnect power before cleaning.
User questions about GigaX 1124i ASUS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual GigaX 1124i - ASUS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GigaX 1124i by ASUS.
USER MANUAL GigaX 1124i ASUS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ASUS
Model : GigaX 1124i
Category : Router