TPA-200B - Receiver Summit Audio - Free user manual and instructions
Find the device manual for free TPA-200B Summit Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Receiver |
| Brand | Summit Audio |
| Model | TPA-200B |
| Dimensions (W x H x D) | 17 x 3.5 x 12 inches |
| Weight | 15 lbs |
| Power Supply | AC 120V 60Hz |
| Output Power | 100W per channel (stereo) |
| Number of Channels | 2 |
| Speaker Impedance | 8 ohms |
| Frequency Response | 20 Hz – 20 kHz |
| Total Harmonic Distortion (THD) | <0.05% |
| Signal-to-Noise Ratio | >90 dB |
| Audio Inputs | 4x RCA, 1x Phono, 1x Aux |
| Audio Outputs | 2x Speaker, 1x Pre-out, 1x Headphone |
| Tuner | AM/FM with preset memory |
| Remote Control | Included |
| Cleaning Instructions | Wipe with a soft, dry cloth |
| Safety Precautions | Do not expose to water or moisture |
| Repairability | Replaceable fuses and accessible internal components |
Frequently Asked Questions - TPA-200B Summit Audio
How do I connect my speakers to the TPA-200B?
Connect speaker wires to the Speaker Outputs on the back panel. Ensure positive (+) and negative (-) terminals match.
Can I use the TPA-200B with a turntable?
Yes, connect your turntable to the Phono Input. This input is designed for moving magnet cartridges.
How do I set the FM radio presets?
Tune to a station, then press and hold the Memory button. Use the number buttons to select a preset slot.
What is the recommended speaker impedance?
Use speakers with 8 ohms impedance for optimal performance.
Why is there no sound from the speakers?
Check that the Speaker A/B switch is on, the volume is turned up, and the correct input is selected.
How do I clean the receiver?
Unplug the unit and wipe the surface with a soft, dry cloth. Do not use liquid cleaners.
Can I connect headphones?
Yes, plug your headphones into the Headphone Jack on the front panel. Speakers will mute automatically.
What is the power consumption?
The TPA-200B consumes approximately 250W under normal operation.
Does the receiver have a subwoofer output?
No, but you can use the Pre-out to connect an external subwoofer amplifier.
How do I reset the unit to factory settings?
While the unit is off, press and hold the Power button for 10 seconds until 'Reset' appears on the display.
User questions about TPA-200B Summit Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual TPA-200B - Summit Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TPA-200B by Summit Audio.
USER MANUAL TPA-200B Summit Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Summit Audio
Model : TPA-200B
Category : Receiver