Galaxy Audio

AS-1200 - Receiver Galaxy Audio - Free user manual and instructions

Find the device manual for free AS-1200 Galaxy Audio in PDF.

📄 12 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Galaxy Audio AS-1200 - page 2
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Stereo Receiver
Brand Galaxy Audio
Model AS-1200
Dimensions (W x H x D) 17 x 5.5 x 12 inches
Weight 10.5 lbs
Power Supply AC 120V, 60Hz
Power Consumption 150W max
Number of Channels 2 (Stereo)
Output Power per Channel 50W RMS into 8 ohms
Frequency Response 20Hz - 20kHz ±1dB
Signal-to-Noise Ratio 90dB
Total Harmonic Distortion <0.05%
Inputs RCA (AUX, Phono, CD, Tape), FM/AM Antenna
Outputs Speaker terminals (A/B), Headphone jack, Tape REC
Tuner Bands FM, AM
Remote Control Included (infrared)
Cabinet Finish Black metal with brushed aluminum front panel
Cleaning Instructions Wipe with a soft, dry cloth. Avoid solvents.
Safety Precautions Do not expose to moisture or heat. Unplug when not in use.
Spare Parts & Repairability Contact Galaxy Audio customer service for authorized service centers.
General Information Designed for home audio systems. Warranty information available in manual.

Frequently Asked Questions - AS-1200 Galaxy Audio

How do I connect my speakers to the AS-1200 receiver?
Connect the speaker wires to the corresponding speaker terminals on the back panel. Ensure proper polarity (red to red, black to black).
Can I use the AS-1200 with a turntable?
Yes, the receiver has a dedicated Phono input for turntables with a moving magnet cartridge.
What should I do if there is no sound from the speakers?
Check that the receiver is powered on, the correct input is selected, and the speaker selector is set to A or B. Also verify speaker connections and volume level.
How do I set up the FM/AM tuner?
Connect the included antenna to the FM/AM terminals. Use the Tuner button to select FM or AM, then press the Seek/Tuning buttons to find stations.
Does the AS-1200 have a remote control?
Yes, an infrared remote control is included for basic functions like volume, input selection, and power.
What is the maximum power output of this receiver?
The AS-1200 delivers 50 watts per channel continuous RMS power into 8 ohms, sufficient for most home speakers.
How do I clean the receiver?
Use a soft, dry cloth to wipe the exterior. Do not use chemical cleaners or water, and avoid getting moisture inside the unit.
Can I connect a subwoofer to the AS-1200?
The receiver does not have a dedicated subwoofer output. You can connect a powered subwoofer using the Tape Rec output or a high-level input from speaker terminals.
Where can I download the user manual?
The manual is available for free download at notice-facile.com or from the Galaxy Audio support page.
What should I do if the receiver overheats?
Ensure adequate ventilation around the unit. Do not block the cooling vents. If overheating persists, turn off the receiver and contact customer support.

User questions about AS-1200 Galaxy Audio

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Receiver in PDF format for free! Find your manual AS-1200 - Galaxy Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AS-1200 by Galaxy Audio.

USER MANUAL AS-1200 Galaxy Audio

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Galaxy Audio

Model : AS-1200

Category : Receiver