DataVideo

VGB-2000 - Uncategorized DataVideo - Free user manual and instructions

Find the device manual for free VGB-2000 DataVideo in PDF.

📄 84 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice DataVideo VGB-2000 - page 4
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Video Switcher
Model VGB-2000
Brand DataVideo
Dimensions (W x D x H) 430 x 250 x 88 mm
Weight 5.5 kg
Power Supply AC 100-240V, 50/60Hz
Power Consumption 150W
Video Inputs 8 x SDI, 4 x HDMI
Video Outputs 2 x SDI PGM, 1 x HDMI PGM, 1 x SDI AUX
Supported Resolutions 1080p, 1080i, 720p
Control Interface Built-in LCD touchscreen, buttons
Key Features Chroma key, picture-in-picture, transitions, effects
Audio Support Embedded audio, analog audio inputs
Connectivity Ethernet for control, USB for firmware updates
Cooling Fan-cooled
Operating Temperature 0-40°C
Storage Temperature -20-60°C
Rackmountable Yes, 2U
Included Accessories Power cord, user manual, rack ears
Maintenance Clean with dry cloth, avoid liquids
Safety Precautions Operate in dry environment, avoid overheating

Frequently Asked Questions - VGB-2000 DataVideo

How do I connect video sources to the VGB-2000?
Connect your video sources to the SDI or HDMI inputs on the rear panel. Use high-quality cables for best signal integrity. The switcher automatically detects the input format.
Can I use the VGB-2000 for live streaming?
Yes, the VGB-2000 can output video via HDMI or SDI to a capture card or encoder for live streaming. It supports common resolutions like 1080p.
How do I perform a chroma key (green screen)?
Use the built-in chroma keyer in the menu. Select a video source, enable chroma key, and adjust the color picker and tolerance to remove the background. Fine-tune with edge and spill controls.
What is the maximum number of layers or picture-in-picture?
The VGB-2000 supports up to 4 picture-in-picture windows simultaneously. You can resize and position each PIP independently.
How do I update the firmware?
Download the latest firmware from the DataVideo website. Copy the file to a USB drive, insert it into the USB port, and follow the on-screen update instructions in the system menu.
The output shows no signal. What should I check?
First, ensure all video sources are powered on and connected. Check that the input is selected on the switcher. Verify cable connections and try a different cable. If using SDI, confirm the correct SDI standard.
Can I control the VGB-2000 remotely?
Yes, you can control the switcher via Ethernet using the DataVideo software or third-party controllers. Configure the IP address in the network settings.
How do I clean the device?
Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use any liquids or abrasive cleaners. For the screen, use a microfiber cloth.
What are the warranty terms?
DataVideo typically offers a 1-year warranty on the VGB-2000. Extended warranties may be available. Keep your purchase receipt for service claims.
Where can I find the user manual?
The user manual is available for free download on the DataVideo website or on notice-facile.com. You can also request a translated version by providing your email.

User questions about VGB-2000 DataVideo

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Uncategorized in PDF format for free! Find your manual VGB-2000 - DataVideo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VGB-2000 by DataVideo.

USER MANUAL VGB-2000 DataVideo

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : DataVideo

Model : VGB-2000

Category : Uncategorized