H262-P61 - Server GIGABYTE - Free user manual and instructions
Find the device manual for free H262-P61 GIGABYTE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server |
| Form Factor | 2U Rackmount |
| Height | 3.5 inches (8.9 cm) |
| Width | 17.6 inches (44.7 cm) |
| Depth | 29.5 inches (75 cm) |
| Weight | 20 kg (44 lbs) approx. depending on configuration |
| Power Supply | Dual redundant 1600W AC, hot-swappable |
| Input Voltage | 100-127V / 200-240V AC, auto-ranging |
| Power Efficiency | 80 PLUS Gold certified |
| Processor Support | Dual Intel Xeon Scalable (1st/2nd/3rd Gen), socket LGA 3647 |
| Memory | 24x DDR4 ECC RDIMM/LRDIMM, up to 1.5TB with 128GB DIMMs |
| Memory Speed | Support up to 2933 MHz depending on CPU |
| Expansion Slots | 6x PCIe 3.0 x16, 2x PCIe 3.0 x8 |
| Storage | 8x 2.5-inch hot-swap SATA/SAS bays (optional NVMe support) |
| RAID Support | Optional hardware RAID controller (e.g., LSI MegaRAID) |
| Network | Dual 10GbE SFP+ ports, Dual 1GbE RJ45 ports |
| Management | BMC (IPMI 2.0) with dedicated Gigabit management port |
| System Fans | 4x hot-swappable heavy duty fans, redundant |
| Operating Temperature | 10°C to 35°C (50°F to 95°F) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Operating Humidity | 8% to 90% (non-condensing) |
| Safety Certifications | UL, CE, FCC Class A, RoHS |
| Cleaning Instructions | Power off and unplug before cleaning. Use dry compressed air to remove dust from vents. Avoid liquid cleaners. |
| Spare Parts Availability | Hot-swap PSU, fans, hard drives; contact Gigabyte or authorized resellers. |
| Warranty | 3-year limited warranty (parts and labor) |
Frequently Asked Questions - H262-P61 GIGABYTE
How do I install the processor and memory?
First, ensure you are grounded. Open the top cover, locate the CPU sockets (LGA 3647). Insert the CPU matching the alignment marks, close the socket lever. For memory, populate DIMM slots in order: start with the white slots for each CPU. Refer to the user manual for supported configurations.
What type of RAID does this server support?
The Gigabyte H262-P61 does not include an integrated RAID controller. You can install an optional hardware RAID card in a PCIe slot. Common choices are LSI MegaRAID or Broadcom RAID adapters. Software RAID is also possible via the operating system.
How do I reset the BMC password?
You can reset the BMC password by using the jumper on the motherboard (JBAT1) or through a physical presence button (if available). Alternatively, connect to the serial console during boot and follow the prompts. See the manual for jumper location.
Can I use non-ECC memory?
No, the server requires DDR4 ECC registered or load-reduced DIMMs (RDIMM/LRDIMM). Non-ECC memory is not compatible and may cause instability or failure to boot.
What is the maximum storage capacity?
With eight 2.5-inch bays, the maximum capacity depends on drive size. Using 30TB SAS SSDs, you can achieve up to 240TB raw. For NVMe, supported in some bays, capacities vary. Always check the compatibility list.
How do I access the IPMI interface?
By default, the BMC obtains an IP via DHCP. Connect to the dedicated management port (labeled Mgmt). You can find the IP in the BIOS setup or router. Access via web browser using https://. Default credentials are admin/admin (change immediately).
Why are the fans running at high speed?
High fan speed can be due to high ambient temperature, a faulty fan, or incorrect BMC settings. Check the temperature sensors in IPMI. Ensure all fans are properly connected. You can adjust fan profiles in BIOS or IPMI if needed.
How do I update the BIOS?
Download the latest BIOS from Gigabyte's support site. Use the EFI shell update tool included in the package. Boot to the UEFI shell and run the utility. Alternatively, some BMC versions allow BIOS updates through the web interface.
The server does not power on. What should I check?
First, verify power cables and PSU indicators. Both PSUs should have green LEDs. If not, check the AC source. Try with one PSU only. If still no power, check the front panel power switch connection. You can also short the power button pins on the motherboard header to test.
Is the H262-P61 compatible with 3rd Gen Intel Xeon Scalable?
Yes, the H262-P61 supports 3rd Gen Intel Xeon Scalable processors (Ice Lake) with a BIOS update. Ensure you have the latest BIOS version (e.g., F10 or higher). Check the CPU support list on Gigabyte's website.
User questions about H262-P61 GIGABYTE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual H262-P61 - GIGABYTE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. H262-P61 by GIGABYTE.
USER MANUAL H262-P61 GIGABYTE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GIGABYTE
Model : H262-P61
Category : Server