MN26 - Multimeter Extech - Free user manual and instructions
Find the device manual for free MN26 Extech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Digital Multimeter |
| Display | 3.5 digit LCD, 2000 counts |
| DC Voltage | 200mV / 2V / 20V / 200V / 600V ±0.5% |
| AC Voltage | 200mV / 2V / 20V / 200V / 600V ±1.2% |
| DC Current | 200µA / 2mA / 20mA / 200mA / 10A ±1.0% |
| AC Current | 200µA / 2mA / 20mA / 200mA / 10A ±1.5% |
| Resistance | 200Ω / 2kΩ / 20kΩ / 200kΩ / 2MΩ ±0.8% |
| Diode Test | Yes, forward voltage drop |
| Continuity Buzzer | Yes, threshold <30Ω |
| Data Hold | Yes, button on side |
| Overload Protection | Yes, fuses for current ranges |
| Power Supply | 9V battery (NEDA 1604, included) |
| Dimensions | 150 x 70 x 40 mm |
| Weight | 200 g (including battery) |
| Safety Rating | CAT I 600V, CAT II 300V |
| Accessories Included | Test leads, 9V battery, user manual |
| Maintenance | Clean with dry cloth; do not use solvents |
| Battery Replacement | Remove back cover, replace with 9V battery |
| Reparability | No user-serviceable parts; contact service center |
| Transistor Test | Not supported |
Frequently Asked Questions - MN26 Extech
How do I measure DC voltage with the Extech MN26?
Turn the dial to the V DC range (200mV to 600V). Insert the black lead into COM and red lead into VΩ. Connect probes to the circuit and read the display.
How do I measure AC voltage?
Turn the dial to the V AC range. Use the same lead connections as DC. The meter displays the RMS value.
How do I measure resistance?
Turn the dial to the Ω range. Insert leads into COM and VΩ. Touch probes to the resistor leads. For best accuracy, disconnect power from the circuit.
How do I test continuity?
Turn the dial to the continuity symbol (diode with sound waves). Connect probes as for resistance. The buzzer sounds if resistance is below 30Ω.
How do I replace the battery?
Turn off the meter. Remove the screw on the back cover. Lift off the cover and replace the 9V battery. Reattach the cover and screw.
What is the accuracy of the MN26?
Accuracy is specified as ±(% of reading + digits). For DC voltage, it is ±0.5%. Refer to the manual for full details.
Can the MN26 measure temperature?
No, the Extech MN26 does not have a temperature measurement function.
How do I use the data hold function?
Press the HOLD button on the side of the meter. The display will lock the current reading. Press again to release.
What is the maximum voltage the MN26 can measure?
The maximum voltage is 600V for both AC and DC. Do not exceed this rating to avoid damage.
How do I test a diode?
Turn the dial to the diode symbol. Connect the black lead to COM and red to VΩ. Place the red probe on the anode and black on the cathode. The display shows the forward voltage drop.
User questions about MN26 Extech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Multimeter in PDF format for free! Find your manual MN26 - Extech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MN26 by Extech.
USER MANUAL MN26 Extech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Extech
Model : MN26
Category : Multimeter