Vitek

VTD-THD5RV - Security Camera Vitek - Free user manual and instructions

Find the device manual for free VTD-THD5RV Vitek in PDF.

📄 12 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Vitek VTD-THD5RV - page 2
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Security Camera
Brand Vitek
Model VTD-THD5RV
Video Resolution 5 MP (2592 x 1944)
Video Format HD-TVI
Lens Type Fixed 2.8 mm
Night Vision Range Up to 30 m (98 ft)
Infrared LEDs Yes, 12 pcs
Weatherproof Rating IP67
Power Supply DC 12V ± 10%
Power Consumption 5W (max)
Dimensions (W x H x D) 70 mm x 180 mm x 70 mm
Weight 0.52 kg
Mounting Type Wall or ceiling bracket
Housing Material Metal with plastic dome
Day/Night Function Yes, auto switch (ICR)
Motion Detection Built-in (configurable via DVR)
Wide Dynamic Range DWDR
Operating Temperature -40°C to 60°C (-40°F to 140°F)
Included Accessories Mounting kit, screw pack, manual

Frequently Asked Questions - VTD-THD5RV Vitek

How do I reset the VTD-THD5RV camera to factory defaults?
Press and hold the reset button (located near the cable connector) for 10 seconds until the camera restarts. The default IP settings are restored.
What type of coax cable is recommended?
Use RG59 or RG6 coaxial cable with BNC connectors for optimal signal quality up to 500 m.
Can this camera work with a standard analog DVR?
No, the VTD-THD5RV outputs HD-TVI signal; it requires an HD-TVI DVR or a compatible hybrid DVR.
Does the camera support audio?
No, this model does not have built-in audio; it is a video-only camera.
What is the maximum distance for night vision?
The IR LEDs provide visible illumination up to 30 meters (98 feet) in complete darkness.
Is the camera weatherproof for outdoor use?
Yes, it has an IP67 rating, fully protected against dust and water immersion up to 1m for 30 minutes.
How do I adjust the camera angle?
Loosen the mounting bracket's adjustment screws, tilt and pan the camera to the desired position, then tighten the screws securely.
What power supply is needed?
The camera requires a 12V DC power supply with a minimum current rating of 1A (not included). A 2A adapter is recommended for long cable runs.
Can I use this camera with a CCTV power extension cable?
Yes, but keep the total power cable length under 30 m to avoid voltage drop; use 18 AWG or thicker wire.
What is the field of view?
With the 2.8mm lens, the horizontal field of view is approximately 90 degrees.

User questions about VTD-THD5RV Vitek

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Security Camera in PDF format for free! Find your manual VTD-THD5RV - Vitek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VTD-THD5RV by Vitek.

USER MANUAL VTD-THD5RV Vitek

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Vitek

Model : VTD-THD5RV

Category : Security Camera