6X-500 - Receiver Lindell Audio - Free user manual and instructions
Find the device manual for free 6X-500 Lindell Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 500-Series Receiver Module |
| Form Factor | 500-series single slot |
| Dimensions (HxWxD) | 1.5 x 5.25 x 7 inches (38 x 133 x 178 mm) |
| Weight | 0.5 kg (1.1 lbs) |
| Power Supply | Powered via 500-series rack bus (15V DC) |
| Input Connector | XLR (balanced) |
| Output Connector | XLR (balanced) |
| Frequency Response | 20 Hz – 20 kHz (±0.5 dB) |
| Maximum Input Level | +24 dBu |
| Maximum Output Level | +24 dBu |
| THD+N | < 0.005% at 1 kHz, +20 dBu |
| Signal-to-Noise Ratio | > 100 dB (unweighted) |
| Gain | Fixed or adjustable (depending on configuration) |
| Operating Temperature | 0°C – 40°C (32°F – 104°F) |
| Compatibility | Standard 500-series rack with +/-16V DC power |
| Material | Aluminum chassis with steel front panel |
| Included Accessories | Mounting screws, user manual |
| Certifications | CE, RoHS |
Frequently Asked Questions - 6X-500 Lindell Audio
What type of power supply does the 6X-500 require?
The 6X-500 is powered directly from the 500-series rack frame. It requires a standard ±16V DC supply from the rack's backplane. No external power adapter is needed.
Is the 6X-500 compatible with all 500-series racks?
Yes, it is compatible with any standard 500-series rack that provides the correct ±16V DC power and follows the 500-series mechanical specifications (3U, 1.5 inches wide per slot).
What type of cables do I need for the 6X-500?
The module uses standard male and female XLR connectors for input and output. Use balanced XLR cables for best performance. The pinout is standard: pin 2 hot (+), pin 3 cold (-), pin 1 ground.
Can I use the 6X-500 as a preamplifier?
The 6X-500 is a receiver, not a preamplifier. It is designed to accept line-level signals and provide balanced output. For microphone preamplification, look for a dedicated microphone preamp module.
What is the maximum input level the 6X-500 can handle?
The maximum input level is +24 dBu before clipping. This is typical for professional line-level signals.
How do I install the 6X-500 into my rack?
Slide the module into an empty 500-series slot, aligning the card edge with the backplane connector. Secure it with the provided screws on the front panel. Ensure the rack is powered off during installation.
Does the 6X-500 have any switches or controls?
This particular model typically has no front-panel controls; it is a straight-through receiver module. However, some versions may include a gain trim or pad switch. Check your specific unit.
What is the frequency response of the 6X-500?
The frequency response is 20 Hz to 20 kHz within ±0.5 dB, ensuring accurate signal transfer across the audible range.
Is the 6X-500 balanced or unbalanced?
Both input and output are fully balanced on XLR connectors, providing common-mode rejection and reduced noise over long cable runs.
What should I do if the module is not working?
First, ensure the rack is powered and that the slot is functional by testing with another module. Check that the module is fully seated in the backplane. If issues persist, contact Lindell Audio support or your dealer.
User questions about 6X-500 Lindell Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual 6X-500 - Lindell Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 6X-500 by Lindell Audio.
USER MANUAL 6X-500 Lindell Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Lindell Audio
Model : 6X-500
Category : Receiver