SlamPak SLPK-YA-19FXC-Sub - Uncategorized JL Audio - Free user manual and instructions
Find the device manual for free SlamPak SLPK-YA-19FXC-Sub JL Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Powered Subwoofer System |
| Brand | JL Audio |
| Model | SlamPak SLPK-YA-19FXC-Sub |
| Amplifier Type | Class-D Digital Amplifier |
| RMS Power Handling | 400 Watts RMS |
| Peak Power Handling | 800 Watts Peak |
| Frequency Response | 20 Hz – 200 Hz |
| Impedance | 2 ohms (dual voice coil) |
| Enclosure Type | Vented (Bass-Reflex) |
| Subwoofer Size | 12 inches |
| Input Connections | RCA Line-Level, Speaker-Level Inputs |
| Output Connections | Speaker-Level Outputs (passthrough) |
| Power Supply | 12V DC (Vehicle Electrical System) |
| Dimensions (Approx.) | 18" x 14" x 12" (L x W x H) |
| Weight (Approx.) | 35 lbs (16 kg) |
| Woofer Material | Injection-Molded Polypropylene Cone with Rubber Surround |
| Crossover | Built-in Low-Pass Filter, Variable 50-200 Hz |
| Bass Boost | 0-12 dB Boost at 45 Hz |
| Remote Control | Wired Bass Level Remote (included) |
| Protection Features | Thermal Overload, Short Circuit, DC Offset Protection |
| Color | Black Carpet with Red Stitching |
| Installation | Designed for Trunk or Cargo Area Installation |
| Warranty | 2 Years Limited Warranty |
| Manual Included | Yes (PDF available on JL Audio website) |
Frequently Asked Questions - SlamPak SLPK-YA-19FXC-Sub JL Audio
What is the power requirement for the SlamPak SLPK-YA-19FXC-Sub?
The subwoofer operates on a standard 12V DC vehicle electrical system. Ensure your vehicle's alternator and battery can supply adequate current (typically 30-40A fuse recommended).
How do I connect the subwoofer to my factory stereo?
Use the speaker-level inputs. Connect the factory speaker wires to the included harness, observing polarity. The subwoofer will automatically turn on when signal is detected.
Can I use this subwoofer in a home theater system?
The SlamPak is designed for 12V automotive use. For home use, you would need a 12V power supply with sufficient amperage, which is not recommended for optimal performance.
What is the recommended enclosure volume for this subwoofer?
The subwoofer comes pre-loaded in a custom-tuned enclosure. Do not remove the subwoofer from the enclosure; it is designed as a complete system.
How do I adjust the bass level?
Use the included wired remote bass level controller. It adjusts the output level from the subwoofer independently of the main volume.
Is the subwoofer weather-resistant?
The enclosure is carpeted and not weatherproof. Avoid exposure to moisture or extreme temperatures. Install in a dry area.
What should I do if the subwoofer goes into protection mode?
Check for short circuits, low impedance, or overheating. Ensure proper ventilation. If problem persists, consult an authorized JL Audio dealer.
Can I mount the subwoofer in a sealed enclosure?
No, the subwoofer is designed specifically for the included vented enclosure. Using a different enclosure may damage the subwoofer.
How do I clean the subwoofer?
Use a soft, dry cloth to wipe the enclosure. Do not use liquid cleaners or solvents. Avoid getting moisture on the cone or components.
Where can I find the full user manual?
The user manual is available for free download on the JL Audio website in the Product Support section. A PDF version is also included on the product page.
User questions about SlamPak SLPK-YA-19FXC-Sub JL Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual SlamPak SLPK-YA-19FXC-Sub - JL Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SlamPak SLPK-YA-19FXC-Sub by JL Audio.