GREE

LIVS12HP115V1BH - Air conditioner GREE - Free user manual and instructions

Find the device manual for free LIVS12HP115V1BH GREE in PDF.

📄 22 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice GREE LIVS12HP115V1BH - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Air Conditioner (Ductless Mini-Split)
Model LIVS12HP115V1BH
Brand Gree
Cooling Capacity 12,000 BTU/h
Power Supply 115V / 60Hz
Energy Efficiency Ratio (EER) 12.0 (estimated)
Refrigerant R-410A
Compressor Type Rotary (Inverter)
Indoor Unit Dimensions (W×H×D) Approx. 36.2 × 11.5 × 8.3 in (920 × 292 × 210 mm)
Outdoor Unit Dimensions (W×H×D) Approx. 30.3 × 21.7 × 12.6 in (770 × 551 × 320 mm)
Indoor Unit Weight Approx. 20.5 lb (9.3 kg)
Outdoor Unit Weight Approx. 64.6 lb (29.3 kg)
Airflow Volume (Hi/Lo) High: 380 CFM, Low: 280 CFM
Operating Modes Cool, Heat, Fan, Dry, Auto
Fan Speeds 5 speeds + Auto
Remote Control Included (wired/wireless)
Filter Type Washable anti-bacterial filter
Cleaning Maintenance Clean filter every 2 weeks; professional cleaning recommended annually
Safety Protections Overload protection, restart delay, anti-freeze
Warranty 5 years compressor, 1 year parts (verify with seller)

Frequently Asked Questions - LIVS12HP115V1BH GREE

How do I clean the air filter?
Open the front panel, remove the filter, vacuum or wash with mild detergent, dry completely, and reinsert. Clean every 2 weeks for optimal performance.
What are the recommended minimum distances for installation?
Indoor unit: at least 6 inches from ceiling and walls. Outdoor unit: at least 2 feet from obstacles for airflow. Refer to manual for exact clearances.
How do I set the timer?
Press the TIMER button on the remote. Use +/- to set desired on/off time. Confirm with SET button. The unit will automatically start/stop at the set time.
Why is my air conditioner not cooling?
Check if filter is dirty, thermostat set correctly, mode set to COOL, and circuit breaker is on. Also ensure outdoor unit is not blocked.
Can I use an extension cord?
No, the unit must be plugged directly into a dedicated outlet. Using an extension cord may cause voltage drop and damage the compressor.
How do I switch between Celsius and Fahrenheit?
Press and hold the MODE button for 5 seconds on the remote control to toggle between °C and °F.
What does the 'E' error code mean?
An 'E' code typically indicates a sensor malfunction. Refer to the error code table in the manual. Common causes: dirty filter, refrigerant leak, or electrical issue.
Does the unit have a heating function?
Yes, this model is a heat pump and provides both cooling and heating. Set the mode to HEAT for warm air.
How do I change the direction of airflow?
Use the SWING button on the remote to activate automatic vertical louver movement. Manually adjust horizontal vanes for desired direction.
What is the recommended temperature range?
For cooling: 64°F-86°F (18°C-30°C). For heating: 50°F-86°F (10°C-30°C). Operating outside these ranges may reduce efficiency.

User questions about LIVS12HP115V1BH GREE

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Air conditioner in PDF format for free! Find your manual LIVS12HP115V1BH - GREE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LIVS12HP115V1BH by GREE.

USER MANUAL LIVS12HP115V1BH GREE

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : GREE

Model : LIVS12HP115V1BH

Category : Air conditioner