WT-3144P - Clock LA CROSSE TECHNOLOGY - Free user manual and instructions
Find the device manual for free WT-3144P LA CROSSE TECHNOLOGY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Atomic Wall Clock |
| Brand | La Crosse Technology |
| Model | WT-3144P |
| Dimensions | 12.0 x 8.0 x 2.0 inches |
| Weight | 1.0 lb (0.45 kg) |
| Power Source | 2 x AA alkaline batteries (not included) |
| Time Synchronization | Atomic time via WWVB radio signal |
| Time Format | 12-hour or 24-hour selectable |
| Calendar Display | Date and day of the week |
| Time Zones | 7 selectable (Atlantic, Eastern, Central, Mountain, Pacific, Alaskan, Hawaiian) |
| Daylight Saving Time | Automatic adjustment with manual on/off option |
| Display Type | LCD digital display |
| Mounting | Wall mount or table stand |
| Low Battery Indicator | Yes |
| Controls | Push buttons for settings |
| Cleaning Instructions | Wipe with a soft, dry cloth |
| Safety Precautions | Keep away from moisture and extreme temperatures |
| Repair and Service | No user serviceable parts; contact La Crosse customer support |
| Warranty | Limited 1-year warranty |
| Included Accessories | Clock, user manual |
Frequently Asked Questions - WT-3144P LA CROSSE TECHNOLOGY
How do I set the time manually?
Press and hold the SET button for 3 seconds. Use the +/- buttons to adjust hours and minutes. Press SET again to save.
How do I change the battery?
Open the battery compartment on the back. Remove old batteries and insert two new AA alkaline batteries with correct polarity. Close the cover.
How do I set the time zone?
Press the TIME ZONE button repeatedly until your zone appears (ET, CT, MT, PT, etc.). The clock will sync automatically.
How does the atomic time sync work?
The clock automatically receives the WWVB radio signal from Fort Collins, Colorado, USA. It syncs daily, typically at night, to maintain accuracy.
What should I do if the clock does not receive the atomic signal?
Place the clock near a window and away from electronic interference. Press the RECEIVE button to force a signal search. It may take several minutes.
How do I adjust the DST setting?
Press the DST button to toggle DST on or off. The default setting is on (AUTOMATIC). Switch to off if you live in an area without DST.
What type of batteries should I use?
Use alkaline batteries for best performance. Do not use rechargeable batteries as they have lower voltage.
How do I mount the clock on the wall?
Insert a screw into the wall, leaving the head protruding. Hang the clock using the keyhole slot on the back. Ensure the slot fits securely over the screw.
Why is the display dim?
Dim display may indicate low batteries. Replace them with fresh alkaline batteries. Also check if the contrast setting is too low (if available).
How do I reset the clock to factory defaults?
Press and hold the RESET button (often located inside the battery compartment) for 3 seconds. The clock will reset and start searching for the atomic signal.
User questions about WT-3144P LA CROSSE TECHNOLOGY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Clock in PDF format for free! Find your manual WT-3144P - LA CROSSE TECHNOLOGY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WT-3144P by LA CROSSE TECHNOLOGY.
USER MANUAL WT-3144P LA CROSSE TECHNOLOGY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LA CROSSE TECHNOLOGY
Model : WT-3144P
Category : Clock