308-2316 - Weather Station LA CROSSE TECHNOLOGY - Free user manual and instructions
Find the device manual for free 308-2316 LA CROSSE TECHNOLOGY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Weather Station |
| Brand | La Crosse Technology |
| Model | 308-2316 |
| Indoor Temperature Range | 32°F to 122°F (0°C to 50°C) |
| Outdoor Temperature Range | -40°F to 140°F (-40°C to 60°C) |
| Indoor Humidity Range | 1% to 99% RH |
| Outdoor Humidity Range | 1% to 99% RH |
| Wireless Range | 330 feet (100 meters) open air |
| Power Source | 2 AA alkaline batteries (for display), 2 AA alkaline batteries (for outdoor sensor) |
| Battery Life | Approximately 12 months |
| Dimensions (Display) | 5.75 x 3.25 x 1.25 inches |
| Weight (Display) | 0.4 lbs |
| Dimensions (Sensor) | 2.5 x 0.75 x 4.25 inches |
| Weight (Sensor) | 0.2 lbs |
| Functions | Atomic time and date, indoor/outdoor temperature and humidity, trend arrows, heat index, dew point, low battery indicator |
| Care and Cleaning | Use a soft, dry cloth to clean the display and sensor. Avoid using abrasive cleaners or liquids. |
| Safety | Keep batteries out of reach of children. Do not mix old and new batteries. Dispose of batteries properly. |
| Spare Parts and Repairability | Batteries are replaceable. For other parts, contact La Crosse Technology support. Not user-serviceable beyond battery replacement. |
| General Information | Radio-controlled atomic clock synchronizes to WWVB time signal. Requires outdoor sensor (included). |
Frequently Asked Questions - 308-2316 LA CROSSE TECHNOLOGY
How do I set up the La Crosse Technology 308-2316 weather station?
Insert 2 AA batteries into the outdoor sensor first, then into the display. The display will automatically search for the sensor and the atomic time signal. Place the sensor outdoors within 330 feet of the display.
Why is my outdoor sensor not connecting to the display?
Ensure the sensor is within range (330 feet open air) and that both the sensor and display have fresh batteries. Press the TX button on the sensor to force a signal. Also check for interference from metal or electronic devices.
How do I change the batteries in the outdoor sensor?
Remove the sensor from its mounting location. Open the battery compartment and replace the 2 AA alkaline batteries. Re-pair the sensor by pressing the TX button and waiting for the display to show the updated reading.
The display shows dashes for outdoor temperature/humidity. What should I do?
This typically indicates a loss of signal from the sensor. Check the sensor batteries and distance. Press and hold the + button on the display to search for the sensor manually. If dashes persist, reset both units by removing batteries and waiting 30 seconds.
How does the atomic time feature work?
The display automatically receives the WWVB atomic time signal from Fort Collins, Colorado. It syncs daily to maintain accuracy. To force a search, press and hold the SET button for 5 seconds until the signal icon flashes. Keep the display away from electronic interference during syncing.
Can I use rechargeable batteries in the weather station?
It is recommended to use standard alkaline batteries. Rechargeable batteries (NiMH) have a lower voltage (1.2V vs 1.5V) and may not provide optimal performance or accurate readings.
What is the temperature range for the outdoor sensor?
The outdoor sensor operates from -40°F to 140°F (-40°C to 60°C). For accurate readings, place the sensor in a shaded, well-ventilated area away from direct sunlight and precipitation.
How do I reset the weather station to factory defaults?
Remove batteries from both the display and the sensor. Press any button on the display for 20 seconds to discharge residual power. Reinsert batteries after 30 seconds. The display will restart and begin searching for the sensor and atomic time.
What do the trend arrows (up/down) mean?
The arrows indicate whether the temperature or humidity is rising, falling, or steady. An up arrow means the value has increased within the last hour, a down arrow means decreased, and no arrow means stable.
Why is my atomic time off by one hour?
Ensure the time zone setting is correct. Press SET to enter settings, then adjust the time zone offset (e.g., -5 for Eastern, -6 for Central). Also check the DST (Daylight Saving Time) setting is enabled if applicable.
User questions about 308-2316 LA CROSSE TECHNOLOGY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Weather Station in PDF format for free! Find your manual 308-2316 - LA CROSSE TECHNOLOGY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 308-2316 by LA CROSSE TECHNOLOGY.
USER MANUAL 308-2316 LA CROSSE TECHNOLOGY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LA CROSSE TECHNOLOGY
Model : 308-2316
Category : Weather Station