WS-2510 - Weather Station LA CROSSE TECHNOLOGY - Free user manual and instructions
Find the device manual for free WS-2510 LA CROSSE TECHNOLOGY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Weather Station |
| Brand | La Crosse Technology |
| Model | WS-2510 |
| Indoor Temperature Range | 32°F to 122°F (0°C to 50°C) |
| Outdoor Temperature Range | -40°F to 140°F (-40°C to 60°C) |
| Humidity Range | 1% to 99% RH |
| Barometric Pressure Range | 23.62 to 32.48 inHg (800 to 1100 hPa) |
| Forecast | 12-24 hour weather forecast with icons |
| Clock | Atomic time with DST, 12/24 hour format |
| Alarm | Daily alarm with snooze |
| Moon Phase | Display of current moon phase |
| Wireless Range | Up to 300 feet (91 meters) open air |
| Channel | Up to 3 outdoor sensors (TX141TH-Bv3 compatible) |
| Display Size | 5.5 x 4.0 inches (14 x 10 cm) |
| Power Supply | 3 AA alkaline batteries (not included) for main unit |
| Battery Life | Approximately 24 months for main unit |
| Sensor Power | 2 AA alkaline batteries per sensor |
| Dimensions (Main Unit) | 7.5 x 4.5 x 1.0 inches (19 x 11.5 x 2.5 cm) |
| Weight (Main Unit) | 8.5 oz (241 g) |
| Mounting Options | Table stand or wall mount |
| Maintenance | Clean with a soft, dry cloth; avoid liquids |
| Safety | Not a toy; keep away from children; use only specified batteries |
| Spare Parts / Reparability | Contact La Crosse Technology for replacement sensors and service |
| General Information | User manual available for free download at notice-facile.com |
Frequently Asked Questions - WS-2510 LA CROSSE TECHNOLOGY
How do I set up the La Crosse WS-2510 weather station?
Insert 3 AA batteries into the main unit and 2 AA batteries into each outdoor sensor. Place the sensor outdoors within 300 feet range. The main unit will automatically sync.
Why is my outdoor sensor not showing readings?
Check battery polarity and ensure the sensor is within range. Press the SENSOR button on the main unit to search for the sensor. Interference from metal objects may reduce range.
How do I reset the weather station?
Remove all batteries from both the main unit and sensors. Wait 30 seconds, then reinsert batteries. This will restore factory defaults.
Can I add additional outdoor sensors?
Yes, the WS-2510 can support up to 3 sensors. Press and hold the CHANNEL button to set the channel, then assign each sensor to a different channel.
How often does the atomic clock update?
The atomic clock syncs with the WWVB radio signal daily. It may take up to 24 hours for the first sync. Place the unit near a window facing Colorado.
What does the weather forecast icon mean?
Icons indicate expected conditions (sunny, partly cloudy, cloudy, rainy, stormy) based on barometric pressure changes over 12-24 hours.
Why is the temperature reading inaccurate?
Ensure the sensor is placed in a shaded, well-ventilated area away from direct sunlight and heat sources. Check battery level.
How do I set the alarm?
Press and hold the ALARM button to enter alarm mode. Use the +/- buttons to set the hour and minute. Press ALARM again to confirm and enable.
What batteries does the station use?
The main unit uses 3 AA alkaline batteries (not included). Each outdoor sensor uses 2 AA alkaline batteries. Do not use rechargeable batteries as they may cause issues.
How do I clean the weather station?
Use a soft, dry cloth to wipe the display. Do not use water, cleaning solvents, or abrasive cleaners.
User questions about WS-2510 LA CROSSE TECHNOLOGY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Weather Station in PDF format for free! Find your manual WS-2510 - LA CROSSE TECHNOLOGY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WS-2510 by LA CROSSE TECHNOLOGY.