328-1414BW - Weather Station LA CROSSE TECHNOLOGY - Free user manual and instructions
Find the device manual for free 328-1414BW LA CROSSE TECHNOLOGY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Weather Station |
| Brand | La Crosse Technology |
| Model | 328-1414BW |
| Dimensions (approx.) | 7.1 x 4.9 x 1.1 inches (18 x 12.5 x 2.8 cm) |
| Weight (approx.) | 7.1 oz (200 g) |
| Power Supply | 2 AA alkaline batteries (not included) for main unit; 2 AA alkaline batteries for outdoor sensor |
| Main Functions | Indoor/outdoor temperature and humidity; atomic time and date; 12/24 hour time; alarm with snooze; weather forecast icons; moon phase; low battery indicator |
| Temperature Range (Indoor) | 32°F to 122°F (0°C to 50°C) |
| Temperature Range (Outdoor) | -40°F to 140°F (-40°C to 60°C) |
| Humidity Range | 10% to 99% RH |
| Wireless Range | Up to 330 feet (100 m) open air |
| Transmission Frequency | 433 MHz |
| Atomic Time Reception | WWVB (USA) or DCF (Europe) depending on model variant |
| Display Type | LCD with backlight |
| Backlight | Adjustable brightness; remains on for 15 seconds after button press |
| Mounting Options | Table stand or wall mountable |
| Battery Life | Approximately 12-24 months (depends on usage) |
| Maintenance | Clean with a soft, damp cloth; do not use harsh chemicals; replace batteries promptly when low |
| Safety Precautions | Keep away from water and high heat; use only specified batteries; do not mix old and new batteries |
| Spare Parts / Repairability | Outdoor sensor (model TX141TH-Bv3); batteries are user-replaceable; no other user-serviceable parts |
| General Information | Atomic timekeeping; weather forecast based on barometric pressure trend; records min/max readings |
Frequently Asked Questions - 328-1414BW LA CROSSE TECHNOLOGY
How do I set up the weather station?
Insert 2 AA batteries into the outdoor sensor first, then 2 AA batteries into the main display. The display will show a signal icon while it syncs with the sensor and atomic time. It may take up to 10 minutes to complete.
Why is the outdoor temperature not showing?
Check the batteries in the outdoor sensor and ensure it is within 330 feet (100 m) of the main unit with no major obstructions. Press and hold the SENSOR button to resync.
How do I change the batteries?
For the main unit, remove the battery cover on the back and replace with 2 fresh AA alkaline batteries. For the sensor, remove water-resistant housing and replace with 2 AA batteries. Always replace both batteries at the same time.
How does the atomic time sync work?
The clock automatically receives the WWVB signal from Fort Collins, Colorado. It syncs daily around midnight. You can force a sync by pressing the SET button for 3 seconds. Ensure the unit is not placed near metal or electronics.
Why is the display time incorrect?
Check the time zone setting and DST setting (if applicable). You can manually set time if the atomic signal is weak. Navigate to time setting using the SET button and adjust with +/- keys.
How do I activate the backlight?
Press the SET or ALARM button once to turn on the backlight for 15 seconds. For continuous backlight, some models have a switch on the side or in settings.
How accurate is the temperature measurement?
The indoor and outdoor temperature accuracy is ±2°F (±1°C) typical. Humidity accuracy is ±5% RH. Ensure the outdoor sensor is placed in a shaded location away from direct heat sources.
What do the weather forecast icons mean?
The station uses barometric pressure trends to forecast the next 12-24 hours. Icons include Sunny, Partly Cloudy, Cloudy, Rain, and Snow. The forecast is not absolute but an indication.
How do I set the alarm?
Press the ALARM button once to enter alarm mode. Press and hold ALARM for 3 seconds to set alarm hour and minute using +/- keys. Press ALARM again to exit. Press ALARM briefly to arm/disarm the alarm.
The outdoor sensor is not transmitting after battery change. What should I do?
Remove batteries from both units. Press any button on the main unit 20 times to discharge. Reinsert batteries into the sensor first, then the main unit. Wait up to 10 minutes for reconnection.
User questions about 328-1414BW LA CROSSE TECHNOLOGY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Weather Station in PDF format for free! Find your manual 328-1414BW - LA CROSSE TECHNOLOGY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 328-1414BW by LA CROSSE TECHNOLOGY.
USER MANUAL 328-1414BW LA CROSSE TECHNOLOGY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LA CROSSE TECHNOLOGY
Model : 328-1414BW
Category : Weather Station