LA CROSSE TECHNOLOGY

617-2410V3 - Alarm Clock LA CROSSE TECHNOLOGY - Free user manual and instructions

Find the device manual for free 617-2410V3 LA CROSSE TECHNOLOGY in PDF.

📄 10 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice LA CROSSE TECHNOLOGY 617-2410V3 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Alarm Clock
Brand La Crosse Technology
Model 617-2410V3
Dimensions 17.8 x 10.2 x 5.1 cm (7.0 x 4.0 x 2.0 in)
Weight 0.23 kg (0.5 lbs)
Power Source AC adapter (120V, 60Hz) or 2 AAA batteries (backup)
Display LCD screen with time, date, indoor temperature, and humidity
Time Format 12-hour or 24-hour selectable
Alarm Single alarm with snooze function
Snooze Duration 5 minutes
Temperature Range 14°F to 122°F (-10°C to 50°C) indoor
Humidity Range 1% to 99% indoor
Buttons SET, ALARM, UP, DOWN, SNOOZE, LIGHT
Backup Battery Retains time and alarm settings during power outage
Radio Control Not supported
Cleaning Wipe with a soft, dry cloth
Safety Do not immerse in water; for indoor use only
Spare Parts Contact La Crosse Technology support
General Info Household use only
Warranty 1-year limited warranty

Frequently Asked Questions - 617-2410V3 LA CROSSE TECHNOLOGY

How do I set the time?
Press and hold the SET button for 3 seconds, then use UP and DOWN to adjust hours and minutes. Press SET again to confirm.
How do I set the alarm?
Press and hold the ALARM button, then use UP and DOWN to set the alarm time. Press ALARM to confirm.
How do I activate the snooze?
When the alarm sounds, press the SNOOZE button. The alarm will repeat after 5 minutes.
How do I change the batteries?
Open the battery compartment on the bottom, insert 2 AAA batteries with correct polarity (matching + and -).
What do the buttons do?
SET: adjust settings; ALARM: set alarm; UP/DOWN: change values; SNOOZE: silence alarm temporarily; LIGHT: backlight.
How do I adjust the display brightness?
Press the LIGHT button to cycle through brightness levels: high, low, and off.
Why is the display dim or not showing?
Check if batteries are low or the AC adapter is not connected. Replace batteries or connect the adapter if needed.
How do I reset the clock?
Remove batteries and unplug the AC adapter for 1 minute, then reconnect both to reset.
How do I switch between 12-hour and 24-hour format?
While setting the time, press the UP or DOWN button to toggle between 12H and 24H.
How do I change the temperature unit?
Press and hold the SET button until the temperature unit flashes, then press UP or DOWN to choose °F or °C.

User questions about 617-2410V3 LA CROSSE TECHNOLOGY

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Alarm Clock in PDF format for free! Find your manual 617-2410V3 - LA CROSSE TECHNOLOGY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 617-2410V3 by LA CROSSE TECHNOLOGY.

USER MANUAL 617-2410V3 LA CROSSE TECHNOLOGY

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : LA CROSSE TECHNOLOGY

Model : 617-2410V3

Category : Alarm Clock