CMM10 - Receiver JENSEN - Free user manual and instructions
Find the device manual for free CMM10 JENSEN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Receiver |
| Brand | Jensen |
| Model | CMM10 |
| Dimensions (W x H x D) | 17.2 x 4.1 x 11.2 inches (437 x 104 x 284 mm) |
| Weight | 6.7 lbs (3.0 kg) |
| Power Supply | 120V AC, 60Hz |
| Power Consumption | 150W (max) |
| Radio Bands | AM, FM |
| Output Power | 100W per channel (2 channels, 8 ohms) |
| Audio Inputs | 2x RCA, 1x 3.5mm auxiliary |
| Audio Outputs | Speaker terminals, 1x headphone jack |
| Tuner Type | Digital PLL synthesized |
| Controls | Volume, tone (bass/treble), balance |
| Preset Stations | 30 (AM/FM) |
| Remote Control | Included (IR) |
| Antenna | FM wire antenna, AM loop antenna (included) |
| Display | LED digital display |
| Material | Metal chassis, plastic front panel |
| Cleaning | Wipe with a soft, dry cloth. Do not use liquids. |
| Safety | Do not expose to rain or moisture. Unplug during storms. |
| Warranty | 1 year limited |
Frequently Asked Questions - CMM10 JENSEN
How do I connect speakers to the CMM10?
Connect speaker wires to the speaker terminals on the back. Ensure positive (+) to red and negative (-) to black. Use 16-ohm or higher speakers for optimal sound.
Why is there no sound from the receiver?
Check that the volume is turned up, speakers are connected properly, and the correct input source is selected. Also ensure the mute function is not active.
How do I set the clock?
Press the Clock button. Use the Tuning knob to set hours, then press again to set minutes. Finally press Clock to confirm.
How do I clean the receiver?
Use a soft, dry cloth to wipe the exterior. Do not use liquids or abrasive cleaners. Keep the ventilation slots dust-free.
Can I connect a turntable?
Yes, if your turntable has a built-in phono preamp, connect to any RCA input. Otherwise, use an external phono preamp before the receiver.
What is the power output of the CMM10?
The receiver delivers 100 watts per channel into 8 ohms, providing ample power for most home speakers.
How can I improve FM reception?
Extend the included FM wire antenna fully and position it for best reception. Avoid metal objects. You can also connect an external FM antenna.
How do I reset the receiver to factory settings?
Press and hold the Power button for 5 seconds until the display shows 'RESET'. This clears all presets and settings.
Does the CMM10 have Bluetooth?
No, the CMM10 does not have Bluetooth. Use an auxiliary cable or FM transmitter to play audio from Bluetooth devices.
What type of antenna does the CMM10 use?
It comes with a FM wire antenna and an AM loop antenna. The FM antenna connects to the FM screw terminals, and the AM antenna to the AM loop terminals.
User questions about CMM10 JENSEN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual CMM10 - JENSEN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CMM10 by JENSEN.
USER MANUAL CMM10 JENSEN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JENSEN
Model : CMM10
Category : Receiver