Sapel - Synthesizer Frap Tools - Free user manual and instructions
Find the device manual for free Sapel Frap Tools in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Synthesizer Module |
| Brand | Frap Tools |
| Model | Sapel |
| Form Factor | Eurorack |
| Width | 8 HP |
| Depth | 35 mm (approx.) |
| Weight | 120 g |
| Power Supply | +12V: 100 mA, -12V: 60 mA |
| Main Function | Voltage-controlled oscillator with wavefolding |
| Inputs | 1 V/oct CV, 1 FM CV, 1 Sync input |
| Outputs | 2 audio outputs (sine, folded) |
| Controls | Frequency, Fold, FM Amount, Fine Tune |
| LED Indicators | Power LED |
| Frequency Range | 20 Hz to 20 kHz |
| CV Range | 0-10V (typical) |
| Wavefolding | Triangular to complex waveshaping |
| Construction | PCB with aluminum faceplate |
| Maintenance | Wipe with dry cloth; avoid liquids |
| Safety | Disconnect power before installation |
| Spare Parts Availability | Contact Frap Tools support |
| Reparability | User-serviceable fuse; other repairs by technician |
| Warranty | 2 years limited |
Frequently Asked Questions - Sapel Frap Tools
What is the power requirement for the Sapel module?
The Sapel module requires +12V at 100 mA and -12V at 60 mA. It does not require +5V.
Is the Sapel compatible with all Eurorack cases?
Yes, it is a standard Eurorack module and fits any case that provides adequate power and rack space (8 HP width).
How do I connect the power ribbon cable?
Align the red stripe on the ribbon cable with the -12V mark on the module's power header. Ensure correct orientation to avoid damage.
What are the main outputs of the Sapel?
It has two audio outputs: a sine wave output and a wavefolded output. Both are standard 3.5mm mono jacks.
Can the Sapel be used as a standalone oscillator?
Yes, it can produce audio without any CV input. The frequency knob sets the pitch.
What is the wavefolding range?
The Fold knob controls the amount of wavefolding from subtle to extreme, shaping the sine wave into complex waveforms.
Does the Sapel track 1V/oct accurately?
Yes, it is calibrated for 1V/oct tracking across a wide range, typically 8-10 octaves.
How do I clean the module?
Disconnect power and wipe the faceplate with a soft, dry cloth. Do not use liquids or abrasive cleaners.
What should I do if the module doesn't power on?
Check the power ribbon connection and ensure the ribbon is not reversed. Verify that your case provides sufficient current.
Is the Sapel firmware updatable?
No, the Sapel is an analog module and does not have firmware.
User questions about Sapel Frap Tools
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Synthesizer in PDF format for free! Find your manual Sapel - Frap Tools and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Sapel by Frap Tools.
USER MANUAL Sapel Frap Tools
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Frap Tools
Model : Sapel
Category : Synthesizer