Vertex I IW-V61 - Loudspeaker ELAC - Free user manual and instructions
Find the device manual for free Vertex I IW-V61 ELAC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | In-Wall Speaker |
| Brand | ELAC |
| Model | Vertex I IW-V61 |
| Speaker Configuration | 2-Way |
| Woofer Size | 6.5 inches |
| Tweeter Size | 1 inch soft dome |
| Impedance | 8 ohms |
| Frequency Response | 40 Hz - 25 kHz |
| Sensitivity | 88 dB (2.83V/1m) |
| Recommended Amplifier Power | 20-120 watts RMS |
| Cutout Dimensions (W x H) | 7.9 x 11.4 inches |
| Mounting Depth | 3.5 inches |
| Dimensions (W x H x D) | 9.4 x 13.0 x 3.9 inches |
| Weight | 5.5 lbs each |
| Finish | White (paintable grille) |
| Mounting Type | In-wall with dogleg clamps |
| Warranty | 5 years limited |
| Maintenance | Wipe with dry cloth; avoid moisture |
| Safety | Ensure proper wall support; avoid electrical cables |
| Reparability | Contact ELAC support for service |
Frequently Asked Questions - Vertex I IW-V61 ELAC
What is the recommended amplifier power for the ELAC Vertex I IW-V61?
The recommended amplifier power is 20-120 watts RMS per channel at 8 ohms.
Can the grille be painted to match my wall?
Yes, the grille is paintable. Use thin, even coats of spray paint designed for speaker grilles to avoid clogging the mesh.
What is the cutout size required for installation?
The required cutout size is approximately 7.9 x 11.4 inches (200 x 290 mm). Always verify with the included template before cutting.
Does this speaker require a separate subwoofer?
While the IW-V61 has good bass response down to 40 Hz, for deeper bass we recommend adding a subwoofer for home theater or high-impact music.
Is the speaker suitable for use in bathrooms or outdoors?
No, the Vertex I IW-V61 is designed for indoor use only in dry environments. Exposure to moisture can damage the speaker.
Can I use this speaker with a 4-ohm amplifier?
The speaker has an 8-ohm impedance. It can be used with amplifiers rated for 8 ohms; using a 4-ohm rated amplifier is fine, but power output will be lower.
What type of wire should I use for connection?
Use 16 to 14 AWG speaker wire for runs up to 50 feet. Ensure proper polarity (+/-) for correct phasing.
How do I clean the speaker?
Wipe the speaker and grille with a soft, dry cloth. Do not use water or cleaning solvents as they may damage the finish.
What is the warranty period?
ELAC offers a 5-year limited warranty against defects in materials and workmanship from the original purchase date.
Can I install the speaker in a wall with existing insulation?
Yes, the speaker can be installed in insulated walls. Ensure the mounting depth of 3.5 inches is clear and do not block the back of the speaker.
User questions about Vertex I IW-V61 ELAC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual Vertex I IW-V61 - ELAC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Vertex I IW-V61 by ELAC.
USER MANUAL Vertex I IW-V61 ELAC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ELAC
Model : Vertex I IW-V61
Category : Loudspeaker