PH-ABT-12S - Uncategorized American BioTech Supply - Free user manual and instructions
Find the device manual for free PH-ABT-12S American BioTech Supply in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | pH Meter |
| Brand | American BioTech Supply |
| Model | PH-ABT-12S |
| Measurement Range | 0.00 to 14.00 pH |
| Resolution | 0.01 pH |
| Accuracy | ±0.05 pH |
| Calibration | Automatic 1-3 point calibration |
| Display | LCD with backlight |
| Power Supply | 2 x 1.5V AAA batteries (not included) |
| Auto-Off | After 8 minutes of inactivity |
| Waterproof Rating | IP65 (splash-proof) |
| Probe | Replaceable pH electrode with BNC connector |
| Dimensions | 5.9 x 1.8 x 1.2 inches (150 x 46 x 30 mm) |
| Weight | 5.3 oz (150 g) |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Accessories Included | pH electrode, calibration buffers (pH 4.00, 6.86, 9.18), carrying case |
| Maintenance | Rinse probe with distilled water after use; store in storage solution |
| Safety | Do not immerse beyond probe junction; avoid extreme temperatures |
| Spare Parts Available | Replacement pH electrode, batteries, calibration solutions |
Frequently Asked Questions - PH-ABT-12S American BioTech Supply
How do I calibrate the PH-ABT-12S pH meter?
To calibrate, immerse the probe in pH 6.86 buffer, press CAL, then repeat with pH 4.00 and 9.18 for 3-point calibration. Rinse probe between buffers.
What batteries does the PH-ABT-12S use?
It uses two 1.5V AAA batteries (not included). Open the battery compartment on the back to install.
How often should I calibrate the meter?
For best accuracy, calibrate before each use or at least once a week if used frequently.
Can I replace the pH probe?
Yes, the probe is replaceable. Use a standard BNC connector pH electrode. Twist off the old probe and attach a new one.
What is the accuracy of the PH-ABT-12S?
The accuracy is ±0.05 pH after proper calibration.
Is the meter waterproof?
It has an IP65 rating, meaning it is splash-proof but not submersible. Do not immerse the meter body.
What does the display show?
The LCD shows pH value, temperature, battery level, and calibration status. It also has a backlight for low light.
How do I store the pH electrode?
Store the electrode in storage solution or pH 4.00 buffer. Never store dry; keep the cap filled with solution.
What does the auto-off feature do?
The meter automatically turns off after 8 minutes of inactivity to save battery life.
Where can I find replacement parts?
Replacement probes, buffers, and batteries are available from American BioTech Supply or authorized retailers.
User questions about PH-ABT-12S American BioTech Supply
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual PH-ABT-12S - American BioTech Supply and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PH-ABT-12S by American BioTech Supply.
USER MANUAL PH-ABT-12S American BioTech Supply
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : American BioTech Supply
Model : PH-ABT-12S
Category : Uncategorized