HDCC-01 - Audio accessory Metra - Free user manual and instructions
Find the device manual for free HDCC-01 Metra in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Audio Wiring Harness |
| Brand | Metra |
| Model | HDCC-01 |
| Compatibility | Select Chrysler, Dodge, Jeep, and Mitsubishi vehicles (2004-2012) |
| Connector Type | OEM-style plug-and-play |
| Wire Gauge | 18 AWG |
| Dimensions (L x W x H) | 6 x 3 x 1 inches |
| Weight | 0.5 lbs |
| Power Handling | Up to 50 watts RMS |
| Functions | Connects aftermarket radio to factory wiring, retains factory features |
| Installation | Direct plug-in, no cutting or splicing required |
| Maintenance | Keep contacts clean; use dielectric grease if needed |
| Cleaning | Wipe with a dry cloth; avoid liquids |
| Safety | Disconnect vehicle battery before installation |
| Spare Parts | Not available separately; replace entire harness |
| Repairability | Non-repairable; replace if damaged |
| Warranty | 1-year limited warranty |
| Country of Origin | China |
Frequently Asked Questions - HDCC-01 Metra
What vehicles are compatible with the Metra HDCC-01?
The HDCC-01 is compatible with select Chrysler, Dodge, Jeep, and Mitsubishi vehicles from 2004 to 2012. Check the vehicle fitment guide for exact models.
Does this harness retain factory features like steering wheel controls?
No, the HDCC-01 is a basic wiring harness and does not retain factory features such as steering wheel controls or amplified systems. Additional adapters (e.g., ASWC-1) are needed for those features.
Is the HDCC-01 plug-and-play?
Yes, it connects directly to the factory radio connector and aftermarket radio harness — no cutting or splicing is required.
What wire colors are included?
Standard colors: 12V constant (yellow), 12V switched (red), ground (black), left front+ (white), left front- (white/black), right front+ (gray), right front- (gray/black), left rear+ (green), left rear- (green/black), right rear+ (purple), right rear- (purple/black).
Can I use this harness with an aftermarket amplifier?
Directly, no. The harness does not include RCA outputs. You will need an RCA adapter or a line output converter (LOC) to connect an amplifier.
How do I install the HDCC-01 harness?
1. Disconnect the vehicle battery. 2. Remove the factory radio. 3. Unplug the factory connector and plug in the HDCC-01. 4. Connect the aftermarket radio harness to the HDCC-01. 5. Test before final reassembly.
What is the power rating of the HDCC-01?
The harness is rated for 50 watts RMS per channel (total 200W RMS). It is suitable for most standard aftermarket radios.
Is the HDCC-01 compatible with Bose or premium audio systems?
No, it is designed for non-amplified systems. For Bose or other factory amplified systems, use a specific harness (e.g., Metra 70-1787 or 70-1788).
What should I do if the harness doesn't fit?
Double-check the vehicle compatibility. The HDCC-01 uses a flat 16-pin connector common in Chrysler/Jeep vehicles. If your vehicle has a different shape, you may need a different model.
Can I repair a damaged HDCC-01 harness?
Repair is not recommended. Since the harness is fully molded, any damage typically requires replacement. Check warranty for defect coverage.
User questions about HDCC-01 Metra
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio accessory in PDF format for free! Find your manual HDCC-01 - Metra and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HDCC-01 by Metra.
USER MANUAL HDCC-01 Metra
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Metra
Model : HDCC-01
Category : Audio accessory