JK20220B - Switch HAGER - Free user manual and instructions
Find the device manual for free JK20220B HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Hager |
| Model | JK20220B |
| Product Type | Single Pole Switch |
| Color | White |
| Material | Polycarbonate (flame retardant) |
| Dimensions (H x W x D) | 85 x 85 x 40 mm |
| Weight | 100 g |
| Rated Voltage | 230 V AC |
| Rated Current | 10 A |
| Frequency | 50/60 Hz |
| Contact Configuration | SPST (Single Pole Single Throw) |
| Wiring Type | Screw terminals |
| Mounting Type | Flush mount (wall box) |
| Protection Index (IP) | IP20 |
| Operating Temperature | -5°C to +40°C |
| Functions | ON/OFF control, tactile feedback, silent operation |
| Cleaning and Maintenance | Wipe with a dry cloth; avoid water and solvents |
| Safety Standards | CE, RoHS, EN 60669-1 |
| Spare Parts / Replaceability | Replaceable module; screws and frame available separately |
| Warranty | 2 years (manufacturer) |
Frequently Asked Questions - JK20220B HAGER
What is the voltage rating of the Hager JK20220B switch?
The rated voltage is 230 V AC at 50/60 Hz.
Is the JK20220B suitable for outdoor use?
No, the switch has an IP20 rating, making it suitable for indoor use only.
How do I install the Hager JK20220B switch?
Installation should be carried out by a qualified electrician. Connect the live wire to the terminal marked L and the load wire to the other terminal. Ensure the power is off before installation.
What is the maximum current the switch can handle?
The switch can handle a maximum current of 10 A.
Can this switch be used with dimmers?
No, the JK20220B is a standard ON/OFF switch and is not compatible with dimmer controls.
What tools are needed for replacing the switch?
A flathead screwdriver and a voltage tester are typically required. Always disconnect power before starting.
How do I clean the switch?
Wipe the surface with a soft dry cloth. Do not use water, abrasive cleaners, or solvents.
What is the depth of the switch for flush mounting?
The switch body depth is approximately 40 mm, fitting standard wall boxes.
Is the switch compliant with safety standards?
Yes, it complies with CE and RoHS directives and meets EN 60669-1 standards.
Can the switch be used with LED bulbs?
Yes, it is compatible with LED loads up to 10 A, but ensure total load does not exceed the rating.
User questions about JK20220B HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual JK20220B - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. JK20220B by HAGER.
USER MANUAL JK20220B HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : JK20220B
Category : Switch