PDA20BT - Receiver Pyle - Free user manual and instructions
Find the device manual for free PDA20BT Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bluetooth Audio Receiver |
| Brand | Pyle |
| Model | PDA20BT |
| Bluetooth Version | 4.2 |
| Bluetooth Range | Up to 30 feet (10 meters) |
| Audio Input | 3.5mm AUX, RCA |
| Audio Output | RCA (L/R), 3.5mm Headphone |
| Power Supply | 5V DC via USB (cable included) |
| Dimensions (L x W x H) | 3.5 x 2.2 x 0.8 inches |
| Weight | 0.1 lbs (45 g) |
| Supported Audio Codecs | SBC, AAC |
| LED Indicator | Blue (paired), Red (charging) |
| Battery Type | Built-in rechargeable lithium-ion |
| Battery Life | Up to 8 hours |
| Charging Time | 2 hours |
| Operation | Plug and play, no drivers needed |
| Compatibility | Any Bluetooth-enabled device (smartphones, tablets, computers) |
| Included Accessories | USB charging cable, 3.5mm AUX cable |
| Material | Plastic casing with rubber base |
| Certifications | FCC, CE |
| Repairability | Not user-serviceable; contact support for issues |
| Cleaning Instructions | Wipe with a dry, soft cloth. Do not use liquids. |
Frequently Asked Questions - PDA20BT Pyle
How do I pair the Pyle PDA20BT with my smartphone?
Turn on the PDA20BT and set it to pairing mode (usually by holding the power button until the LED flashes blue and red). On your phone, enable Bluetooth and select 'PDA20BT' from the list. Once connected, the LED will turn solid blue.
Can I use the PDA20BT with non-Bluetooth devices?
Yes, you can connect via the 3.5mm AUX input or RCA inputs. Simply plug the device into the receiver, and it will act as a wired receiver.
How do I charge the PDA20BT receiver?
Connect the included USB charging cable to the receiver and a standard USB power source (like a phone charger or computer). The LED will turn red while charging and turn off or blue when fully charged.
What is the Bluetooth range of this device?
The effective Bluetooth range is approximately 30 feet (10 meters) in open space. Walls and obstacles may reduce the range.
Can I connect multiple devices at once?
No, the PDA20BT supports only one Bluetooth connection at a time. However, you can switch between paired devices by disconnecting and reconnecting.
Why is there no sound coming from my speakers?
First, ensure the volume on both the receiver (if available) and your source device is turned up. Check that the audio cables are securely connected to the correct inputs (AUX or RCA). Also confirm that the receiver is powered on and paired.
How do I reset the PDA20BT?
If you experience issues, you can reset the device by turning it off, unplugging it from power, and waiting 30 seconds. Then power it on again. For a factory reset, press and hold the pairing button for 10 seconds until the LED flashes rapidly.
Is this receiver compatible with my car stereo?
Yes, if your car stereo has an AUX input or RCA inputs, you can connect the PDA20BT to stream music wirelessly from your phone. Ensure the receiver is fully charged or plugged into a USB port.
What audio codecs does the PDA20BT support?
It supports SBC and AAC codecs, which are standard for most Bluetooth devices. Higher quality codecs like aptX are not supported.
How do I clean and maintain the PDA20BT?
Use a dry, soft cloth to wipe the exterior. Avoid using liquids or abrasive cleaners. Do not expose to moisture or extreme temperatures. Store in a cool, dry place when not in use.
User questions about PDA20BT Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual PDA20BT - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PDA20BT by Pyle.
USER MANUAL PDA20BT Pyle
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pyle
Model : PDA20BT
Category : Receiver