PMXU46BT - Turntable Pyle - Free user manual and instructions
Find the device manual for free PMXU46BT Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Vinyl Turntable with Bluetooth |
| Brand | Pyle |
| Model | PMXU46BT |
| Dimensions (W x D x H) | 14.5 x 11.8 x 5.5 inches |
| Weight | 6.5 lbs |
| Power Supply | AC 110-240V, 50/60Hz |
| Drive System | Belt Drive |
| Speeds | 33 1/3, 45, 78 RPM |
| Bluetooth Version | 4.0 with 30+ ft range |
| Built-in Speakers | Yes, stereo speakers |
| USB Recording | Yes, to USB flash drive |
| Audio Outputs | RCA line out, headphone jack |
| Cartridge | Ceramic stereo cartridge |
| Stylus | Replaceable diamond-tipped |
| Care and Cleaning | Wipe with soft dry cloth; avoid harsh chemicals |
| Safety Warnings | Keep away from moisture and heat sources |
| Spare Parts / Repairability | Replacement stylus and belt available |
| Included Accessories | Power adapter, USB cable, 45 RPM adapter |
Frequently Asked Questions - PMXU46BT Pyle
How do I connect the turntable to Bluetooth speakers or headphones?
Turn on the turntable and set the function switch to Bluetooth mode. The LED will flash. On your Bluetooth device, search for 'Pyle PMXU46BT' and select it to pair. Once connected, the LED will stay solid.
How do I record vinyl to USB?
Insert a USB flash drive (FAT32 format) into the USB port. Press the REC button to start recording. The turntable will record the audio as an MP3 file. Press again to stop.
How do I replace the stylus (needle)?
Gently pull the old stylus downward to remove it. Align the new stylus with the cartridge and push upward until it clicks into place. Ensure it is securely attached before use.
Can I connect external speakers?
Yes, use the RCA line output or the headphone jack to connect to external speakers or an amplifier. Note that the built-in speakers will be muted when using the RCA output.
What speeds does the turntable support?
The turntable supports 33 1/3, 45, and 78 RPM records. Select the speed using the speed selector switch on the front panel.
How do I adjust the tracking force?
The PMXU46BT has a pre-set counterweight. For optimal playback, ensure the turntable is on a level surface. Minimal adjustment is possible by rotating the counterweight; refer to the manual for exact steps.
Why is the sound distorted or skipping?
Check that the stylus is clean and not damaged. Ensure the turntable is on a stable, level surface. Verify that the anti-skate dial (if present) is set correctly. Dirty records can also cause skipping; clean them with a record brush.
Can I play records through the built-in speakers and external speakers simultaneously?
No, when you connect external speakers via RCA or headphones, the built-in speakers are automatically disabled. Only one output can be active at a time.
Does the turntable automatically stop?
Yes, the PMXU46BT features an auto-stop function that stops the platter when the record finishes playing. You can disable it if needed.
How do I clean the turntable?
Unplug the unit. Use a soft, lint-free cloth slightly dampened with water or mild detergent to wipe the exterior. Do not use alcohol or abrasive cleaners. Clean the stylus gently with a stylus brush.
User questions about PMXU46BT Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Turntable in PDF format for free! Find your manual PMXU46BT - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PMXU46BT by Pyle.
USER MANUAL PMXU46BT Pyle
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pyle
Model : PMXU46BT
Category : Turntable