INF-BC4 - Bluetooth audio receiver INFINITY - Free user manual and instructions
Find the device manual for free INF-BC4 INFINITY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bluetooth Audio Receiver |
| Brand | Infinity |
| Model | INF-BC4 |
| Bluetooth Version | 4.2 |
| Wireless Range | Up to 10 meters (33 feet) |
| Audio Output | 3.5mm stereo jack |
| Power Source | USB 5V DC (cable included) |
| Battery Type | Built-in rechargeable lithium-ion, 120mAh |
| Battery Life | Up to 8 hours of continuous play |
| Charging Time | Approximately 2 hours |
| Dimensions | 5.0 x 5.0 x 1.2 cm (1.97 x 1.97 x 0.47 inches) |
| Weight | 18 g (0.63 oz) |
| Supported Audio Codecs | SBC, AAC |
| Supported Profiles | HFP, HSP, A2DP, AVRCP |
| Noise Reduction | CVC 6.0 echo cancellation |
| Frequency Response | 20 Hz – 20 kHz |
| Signal-to-Noise Ratio | ≥ 80 dB |
| Total Harmonic Distortion | < 0.1% |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Material | ABS plastic with matte finish |
| Care and Cleaning | Wipe with a soft dry cloth; avoid liquids |
| Safety | Complies with CE and RoHS standards |
| Spare Parts & Repairability | Contact Infinity support for replacement parts; device is not user-serviceable |
| General Information | One-year limited warranty against defects |
Frequently Asked Questions - INF-BC4 INFINITY
How do I pair the INF-BC4 with my phone?
Turn on the INF-BC4; it will enter pairing mode automatically with a flashing blue LED. On your phone, enable Bluetooth and select 'INF-BC4' from the available devices. If prompted, enter PIN 0000.
Can I use the receiver while it's charging?
Yes, the INF-BC4 supports pass-through audio, allowing you to stream music while charging via the USB cable.
What is the effective range of the Bluetooth connection?
The effective range is up to 10 meters (33 feet) in open space. Walls and obstacles may reduce the range.
How do I reset the INF-BC4 to factory settings?
Press and hold the multi-function button for 10 seconds until the LED flashes red and blue alternately. The device will reset and enter pairing mode.
Why is the audio quality poor or stuttering?
Ensure the source device is within range and not obstructed. Interference from other wireless devices can cause stuttering. Also, check that the audio output is set to a high bitrate.
Can I connect the INF-BC4 to multiple devices?
The INF-BC4 can remember up to 8 paired devices but can only connect to one at a time. To switch, disconnect the current device and connect the new one.
Does the receiver support aptX?
No, the INF-BC4 supports SBC and AAC codecs but not aptX. For high-quality audio, use AAC with compatible devices.
How do I know when the battery is low?
A red LED will flash and you may hear a low battery tone. The device will automatically power off when the battery is critically low.
What type of audio cable is included?
The package includes a 3.5mm stereo audio cable (about 50 cm) for connecting to speakers or car stereos.
Is the INF-BC4 waterproof?
No, the INF-BC4 is not waterproof. Keep it away from moisture and liquids.
User questions about INF-BC4 INFINITY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Bluetooth audio receiver in PDF format for free! Find your manual INF-BC4 - INFINITY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. INF-BC4 by INFINITY.
USER MANUAL INF-BC4 INFINITY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : INFINITY
Model : INF-BC4
Category : Bluetooth audio receiver