39500RF - Sewing machine Union Special - Free user manual and instructions
Find the device manual for free 39500RF Union Special in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Union Special |
| Model | 39500RF |
| Product Type | Industrial Sewing Machine |
| Category | Sewing Machine |
| Power Supply | 120V AC, 60Hz |
| Motor Power | 550W (typical) |
| Max Sewing Speed | 6,000 stitches/min |
| Stitch Length | Up to 9 mm |
| Needle Type | Standard industrial (e.g., DBx1) |
| Lubrication | Automatic oiling system |
| Workplace Dimensions | Approx. 1200 x 600 mm |
| Weight | Approx. 35 kg |
| Features | Reverse feed, adjustable presser foot pressure, thread trimmer |
| Safety | Safety clutch, finger guard, emergency stop |
| Maintenance | Clean and oil regularly; check needle and bobbin |
| Spare Parts | Needles, bobbins, feed dogs, presser feet available |
| Repairability | Modular design; parts easily replaceable |
Frequently Asked Questions - 39500RF Union Special
How to thread the Union Special 39500RF sewing machine?
First, raise the presser foot. Place thread spool on pin, pass through tension discs, then through the take-up lever, and finally through the needle eye. Refer to the manual for diagrams.
What needle size should be used with the 39500RF?
Standard industrial needles like DBx1 #14 to #18 are recommended. For heavy fabrics, use larger size.
How to adjust stitch length on this machine?
Turn the stitch length dial on the front of the machine. Numbers correspond to mm per stitch. Typical range is 1-9 mm.
What lubricant is recommended?
Use high-quality sewing machine oil (ISO VG 15). Apply to indicated oil points daily.
Why does the machine skip stitches?
Possible causes: bent needle, incorrect needle size, wrong thread tension, or timing issues. Check and replace needle first.
How to clean the 39500RF?
Remove lint and dust using a soft brush or compressed air. Do not use water or solvents on electrical parts. Oil after cleaning.
What is the maximum fabric thickness?
The machine can sew multiple layers of denim or leather up to about 8 mm total thickness under the presser foot.
How to replace the needle?
Loosen the needle clamp screw, remove old needle, insert new needle with flat side facing back, and tighten.
Where to find spare parts?
Contact Union Special dealers or authorized distributors. Many parts are also available online through sewing machine parts suppliers.
How to adjust thread tension?
Turn the tension dial on the front. Higher numbers increase tension. Test on scrap fabric and adjust until stitches are balanced.
User questions about 39500RF Union Special
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sewing machine in PDF format for free! Find your manual 39500RF - Union Special and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 39500RF by Union Special.
USER MANUAL 39500RF Union Special
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Union Special
Model : 39500RF
Category : Sewing machine