GP50T06PVT - Water heater GE - Free user manual and instructions
Find the device manual for free GP50T06PVT GE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Water Heater |
| Brand | GE |
| Model | GP50T06PVT |
| Tank Capacity | 50 Gallons |
| Height | 60.75 inches |
| Width | 20.25 inches |
| Depth | 20.25 inches |
| Weight (Empty) | 150 lbs |
| Voltage | 240 V |
| Wattage (Upper Element) | 4500 W |
| Wattage (Lower Element) | 4500 W |
| Energy Factor (EF) | 0.95 |
| First Hour Rating | 67 Gallons |
| Maximum Temperature | 150°F |
| Temperature Adjustable | Yes (90-150°F) |
| Anode Rod Material | Magnesium |
| Tank Material | Steel with Glass-Lining |
| Insulation | Non-CFC Foam |
| TPR Valve Included | Yes |
| Drain Valve | Yes (Plastic) |
| Warranty (Tank) | 6 Years |
| Warranty (Parts) | 1 Year |
| Installation Type | Freestanding or on Stand |
| Certifications | UL, CSA |
Frequently Asked Questions - GP50T06PVT GE
What is the tank capacity of the GE GP50T06PVT water heater?
The GE GP50T06PVT has a 50-gallon tank capacity, suitable for a family of 3-4 people.
What is the recommended temperature setting for this water heater?
The Department of Energy recommends setting the thermostat to 120°F (49°C) to balance energy efficiency and safety, preventing scalding.
How do I drain the water heater for maintenance?
Turn off power to the unit, connect a hose to the drain valve at the bottom, open the valve and a hot water faucet to allow air in, and let the water drain completely. Drain at least once a year to remove sediment.
What voltage and wattage does the GP50T06PVT require?
It requires a 240V electrical supply with dual 4500W heating elements (upper and lower). A dedicated 30-amp double-pole breaker is typically needed.
How long does it take to recover after a full tank of hot water?
With 4500W elements, the first hour rating is 67 gallons, so recovery to 90% of capacity takes about 40-50 minutes depending on incoming water temperature.
What is the warranty coverage?
The tank has a 6-year warranty against leaks, and parts are covered for 1 year. Labor is not included. Registration may be required.
Can I install this water heater in a garage or basement?
Yes, it can be installed in a garage, basement, or utility closet, but must be level and on a solid surface. Ensure adequate ventilation and clearance for maintenance.
Why is my water heater making a popping noise?
Popping noises are often due to sediment buildup on the lower heating element. Draining and flushing the tank annually can reduce this noise.
How do I replace the anode rod?
Turn off power and water, drain a few gallons, remove the old anode rod (usually located on top), and install a new magnesium or aluminum rod. Tighten to manufacturer torque specifications.
What is the Energy Factor (EF) rating?
The GP50T06PVT has an Energy Factor of 0.95, meaning it converts 95% of the electricity into heat, indicating high efficiency compared to standard models.
User questions about GP50T06PVT GE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual GP50T06PVT - GE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GP50T06PVT by GE.
USER MANUAL GP50T06PVT GE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GE
Model : GP50T06PVT
Category : Water heater