YTNL M11 82K RX - Tumble dryer INDESIT - Free user manual and instructions
Find the device manual for free YTNL M11 82K RX INDESIT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble Dryer |
| Brand | Indesit |
| Model | YTNL M11 82K RX |
| Energy Class | C (EU 2014) |
| Drying Capacity | 8 kg |
| Drying System | Condenser (Self-Cleaning) |
| Control Type | Electronic with LED Display |
| Number of Programs | 15 (Cotton, Synthetics, etc.) |
| Reverse Tumble Action | Yes |
| Anti-Crease Function | Yes (6h phase) |
| Delay Timer | Up to 24h |
| Child Lock | Yes |
| Filter Indicator | Yes |
| Water Tank Capacity | 4.5 L |
| Door | Reversible Hinge |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Weight | 51 kg |
| Power Supply | 220-240 V / 50 Hz |
| Rated Power | 2300 W |
| Noise Level | 65 dB(A) |
| Maintenance | Clean lint filter after each cycle; clean condenser monthly |
| Safety Features | Thermal fuse, overload protection, door lock |
| Spare Parts Available | Belts, heating elements, thermostats, door seals, filters |
Frequently Asked Questions - YTNL M11 82K RX INDESIT
How do I clean the lint filter?
Open the door, pull out the lint filter located at the bottom of the door opening, remove lint with your hands or a vacuum cleaner, rinse under water if needed, dry thoroughly, and reinsert.
Where is the water tank and how do I empty it?
The water tank is located at the top left of the dryer. Pull it out, empty the water into a sink or drain, and push it back in until it clicks.
Why is my dryer taking too long to dry clothes?
Possible causes: the lint filter is clogged, the condenser needs cleaning, the room temperature is too low, the load is too large, or the selected program is not suitable. Check and clean the filter and condenser.
How do I clean the condenser?
Remove the bottom front panel, take out the condenser (blue plastic part), rinse it with a shower head from both sides, shake off water, reinsert, and close the panel.
What do the error codes mean?
Common codes: F01 (motor fault), F02 (heating fault), F03 (NTC sensor), F04 (condenser clogged). Refer to the manual for full list. If persistent, contact support.
Can I open the door while the dryer is running?
Yes, the dryer stops automatically when the door is opened. Close the door and press Start to resume the cycle.
What items should not be dried in this dryer?
Do not dry items contaminated with flammable chemicals (dry cleaning fluid, oil), foam rubber, clothing with metal parts, or delicate fabrics like silk or wool (use specific programs).
How do I use the delay timer?
Select the drying program, press the Delay Timer button repeatedly to set the number of hours delay (1-24), then press Start. The dryer will start after the set time.
Can the door hinge be reversed?
Yes, the door is reversible. Contact an authorized technician or see the manual for instructions on how to change the door opening direction.
Where can I find spare parts or service?
Contact Indesit customer service or authorized service centers. Spare parts are available online or at local appliance parts stores. Use original parts for safety.
User questions about YTNL M11 82K RX INDESIT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble dryer in PDF format for free! Find your manual YTNL M11 82K RX - INDESIT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. YTNL M11 82K RX by INDESIT.
USER MANUAL YTNL M11 82K RX INDESIT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : INDESIT
Model : YTNL M11 82K RX
Category : Tumble dryer