Philco

PWA809M - Air conditioner Philco - Free user manual and instructions

Find the device manual for free PWA809M Philco in PDF.

📄 24 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Philco PWA809M - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Portable Air Conditioner
Model PWA809M
Brand Philco
Cooling Capacity (BTU/h) 8000
Room Size (sq. ft.) Up to 300
Energy Efficiency Ratio (EER) 12.0
Power Supply 115V ~ 60Hz
Power Consumption (Cooling) 800W
Refrigerant Type R-410A
Dimensions (W x H x D) 18.5 x 14.2 x 12.6 in
Weight 52 lbs
Noise Level (Low/High) 52 / 56 dB
Airflow (CFM) 180
Functions Cool, Fan, Dehumidify, Sleep, Timer
Remote Control Yes (included)
Filter Type Washable Mesh
Installation Kit Included Window kit and exhaust hose
Auto Restart Yes
Self-Evaporation Yes
Warranty 1 Year

Frequently Asked Questions - PWA809M Philco

How do I install the Philco PWA809M portable air conditioner?
Installation requires placing the unit near a window. Attach the included exhaust hose to the back of the unit and insert the window kit into the window opening. Secure the window kit according to the manual. Ensure the hose is not bent or kinked.
Can I use the air conditioner without the exhaust hose?
No, the exhaust hose must be vented outside to remove hot air. Operating without it will cause the unit to overheat and reduce cooling efficiency.
How often should I clean the filter?
Clean the washable mesh filter every two weeks under normal use. A clogged filter reduces airflow and efficiency. Remove the filter, vacuum or wash with mild soap, and let it dry completely before reinstalling.
What does the 'Sleep' mode do?
Sleep mode gradually adjusts the temperature by a few degrees over time to reduce energy consumption and provide comfortable sleep conditions. It also lowers the fan speed for quieter operation.
Why is the air conditioner not cooling properly?
Check if the exhaust hose is properly vented and not blocked. Ensure the filter is clean. Verify that the room size is within the unit's capacity (up to 300 sq. ft.). Also, close windows and blinds to minimize heat gain.
Does the PWA809M have a dehumidifier function?
Yes, it has a dehumidifier mode that removes excess moisture from the air. In dehumidifier mode, the fan runs continuously and the compressor cycles on and off to condense water. The water is self-evaporated.
How do I use the timer function?
Press the Timer button on the remote or control panel. Use the + or - buttons to set the desired number of hours (1-24) for the unit to turn on or off automatically. Confirm the setting.
What is the power cord length?
The power cord is approximately 6 feet (1.8 meters) long. Use a grounded outlet. Do not use an extension cord as it can cause overheating.
How do I reset the air conditioner after a power outage?
The unit features auto restart. After a power failure, it will resume operation with the previous settings when power is restored. If not, unplug for 30 seconds and plug back in.
Can I control the air conditioner with a smartphone app?
No, the PWA809M does not have Wi-Fi connectivity. It can be operated using the included remote control or the manual controls on the unit itself.

User questions about PWA809M Philco

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Air conditioner in PDF format for free! Find your manual PWA809M - Philco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PWA809M by Philco.

USER MANUAL PWA809M Philco

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Philco

Model : PWA809M

Category : Air conditioner