EVF-D 15 - Loudspeaker ELECTRO-VOICE - Free user manual and instructions
Find the device manual for free EVF-D 15 ELECTRO-VOICE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Two-way passive loudspeaker |
| Woofer | 15-inch (381 mm) EVS-15S |
| Tweeter | DH3-1 1.25-inch (32 mm) titanium diaphragm compression driver |
| Frequency Response (-3 dB) | 55 Hz - 18 kHz |
| Frequency Range (-10 dB) | 45 Hz - 20 kHz |
| Power Handling (Continuous) | 400 W |
| Power Handling (Peak) | 1600 W |
| Impedance | 8 Ω (nominal) |
| Sensitivity (1W/1m) | 98 dB |
| Maximum SPL | 130 dB |
| Coverage Pattern | 90° x 50° (rotatable horn) |
| Crossover Frequency | 1.5 kHz |
| Connectors | Two Neutrik NL4 Speakon |
| Enclosure Material | Birch plywood with EVCoat finish |
| Grille | 16 GA steel with powder coating |
| Rigging Points | M10 threaded inserts |
| Dimensions (H x W x D) | 27.6 x 16.9 x 16.5 in (701 x 430 x 420 mm) |
| Weight | 68.3 lb (31.0 kg) |
| IP Rating | IP54 (with optional cover) |
| Recommended Amplifier | 600 - 1200 W at 8 Ω |
Frequently Asked Questions - EVF-D 15 ELECTRO-VOICE
What is the recommended amplifier power for the EVF-D 15?
A power amplifier delivering between 600 and 1200 watts into 8 ohms is recommended for optimal performance.
Can the EVF-D 15 be used outdoors?
Yes, the EVF-D 15 is rated IP54 with an optional weather-resistant cover, making it suitable for outdoor use with proper protection.
How do I connect the loudspeaker to an amplifier?
Use the two Neutrik NL4 Speakon connectors. The pins are wired in parallel: pins 1+/1- for the full-range signal. Ensure the amplifier is turned off before connecting.
What is the coverage pattern and can it be rotated?
The horn provides a 90° x 50° coverage pattern. The horn is rotatable to allow horizontal or vertical orientation for optimal coverage.
How do I clean and maintain the EVF-D 15?
Use a dry cloth to clean the enclosure and grille. Do not use solvents or abrasive cleaners. Check grille screws periodically and tighten if loose.
What is the weight of the EVF-D 15?
The loudspeaker weighs approximately 68.3 lb (31.0 kg). Handle with care and use proper lifting techniques.
Can the EVF-D 15 be flown or rigged?
Yes, it has M10 threaded inserts for rigging. Use only certified hardware and consult a professional rigger for safe installation.
What is the maximum SPL of this speaker?
The maximum SPL is 130 dB peak, making it suitable for medium to large venues and live sound reinforcement.
Is the EVF-D 15 a passive or active loudspeaker?
It is a passive loudspeaker, requiring an external amplifier and crossover or DSP for operation.
Where can I find replacement parts or service?
Contact Electro-Voice authorized service centers for genuine replacement parts. Do not attempt to repair the driver or crossover yourself.
User questions about EVF-D 15 ELECTRO-VOICE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual EVF-D 15 - ELECTRO-VOICE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EVF-D 15 by ELECTRO-VOICE.
USER MANUAL EVF-D 15 ELECTRO-VOICE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ELECTRO-VOICE
Model : EVF-D 15
Category : Loudspeaker