FTA 5486 D - Washing machine Cylinda - Free user manual and instructions
Find the device manual for free FTA 5486 D Cylinda in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Washing Machine |
| Brand | Cylinda |
| Model | FTA 5486 D |
| Energy Class | D (2010/30/EU) |
| Capacity (kg) | 6 kg |
| Spin Speed (rpm) | 800 rpm |
| Dimensions (H x W x D) | 85 x 60 x 54 cm |
| Weight (net) | 62 kg |
| Power Supply | 230 V / 50 Hz / 10 A |
| Water Connection | Cold water only, 3/4 inch thread |
| Programs | Cotton, Synthetics, Delicates, Wool, Quick 30 min, Eco |
| Features | Delay start, Child lock, Half load detection, Extra rinse |
| Noise Level (Wash/Spin) | 59 dB / 76 dB |
| Water Consumption per Cycle | 48 L |
| Energy Consumption per Cycle | 0.83 kWh |
| Maintenance | Clean detergent drawer, drain pump filter and drum periodically |
| Safety Features | Child lock, overflow protection, unbalanced load detection |
| Spare Parts Availability | Replacement parts available through authorized service centers |
| Repairability Index | 6.5 / 10 (estimated) |
Frequently Asked Questions - FTA 5486 D Cylinda
How do I install the washing machine?
Remove the transit bolts at the back, level the feet, connect the water inlet hose to a cold water tap with 3/4 inch thread, and connect the drain hose to a standpipe or sink outlet. Ensure the power cord is plugged into a grounded socket.
What does the child lock function do?
The child lock prevents accidental button presses during a cycle. Activate it by pressing and holding the Start/Pause button for 3 seconds. Deactivate the same way.
Why is my machine not spinning?
Check if the load is unbalanced and redistribute the laundry. Ensure the drain pump filter is clean and the hose is not kinked. Also verify that the spin speed is not set to 'No Spin'.
How do I clean the detergent drawer?
Pull out the drawer, remove the insert by pressing the release clip, rinse under warm water, and scrub with a brush. Dry and reassemble. Do this every 2-3 months.
What is the maximum capacity for a cotton cycle?
The maximum capacity for cotton is 6 kg. Overloading may cause poor wash results and excessive noise.
Can I use liquid detergent?
Yes, but use the special insert in the detergent drawer for liquid detergent. Do not fill beyond the 'MAX' level.
How to troubleshoot an error code E10?
E10 indicates a water supply problem. Check that the water tap is fully open, the inlet hose is not kinked, and the water pressure is sufficient. Clean the inlet valve filter.
What does the delay start function do?
Delay start allows you to postpone the start of the cycle by up to 24 hours. Press the Delay Start button repeatedly to set the desired delay in hours.
How to clean the drain pump filter?
Unplug the machine, open the lower flap, place a towel, unscrew the filter cap, remove debris, and screw back. Ensure the cap is tight to avoid leaks.
Where can I find spare parts?
Contact Cylinda authorized service centers or visit the official website for genuine spare parts such as belts, door seals, and pump filters.
User questions about FTA 5486 D Cylinda
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual FTA 5486 D - Cylinda and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FTA 5486 D by Cylinda.
USER MANUAL FTA 5486 D Cylinda
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Cylinda
Model : FTA 5486 D
Category : Washing machine