Profile PNSF35B - Water filter GE - Free user manual and instructions
Find the device manual for free Profile PNSF35B GE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Water Filter for Refrigerator |
| Brand | GE |
| Model | Profile PNSF35B |
| Dimensions | 10.0 x 5.0 x 5.0 inches |
| Weight | 0.5 lb |
| Filtration Capacity | Up to 300 gallons |
| Reduces Contaminants | Lead, chlorine, cysts, sediment, and more |
| Flow Rate | 0.5 GPM |
| Operating Temperature | 33-100°F |
| Pressure Range | 20-120 psi |
| Certifications | NSF/ANSI 42, 53, 401 |
| Recommended Replacement | Every 6 months |
| Installation | Easy twist-and-lock, no tools required |
| Compatible Models | GE Profile refrigerators (various) |
| Material | BPA-free plastic housing |
| Maintenance | Replace filter every 6 months |
| Spare Part | Replacement filter RPWFE or equivalent |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - Profile PNSF35B GE
How often should I replace the GE Profile PNSF35B water filter?
It is recommended to replace the filter every 6 months or after 300 gallons of usage to maintain water quality.
What contaminants does the PNSF35B filter remove?
The filter reduces lead, chlorine, cysts (like Giardia and Cryptosporidium), sediment, and other contaminants. It is certified to NSF standards 42, 53, and 401.
How do I install the PNSF35B water filter?
Installation is straightforward: remove the old filter by turning it counterclockwise, then insert the new filter and turn clockwise until it locks. No tools are needed.
Is the PNSF35B filter compatible with my GE refrigerator?
The PNSF35B is designed for many GE Profile refrigerators. Check your refrigerator model number or consult the manual for compatibility.
What should I do after replacing the filter?
After installation, run 3-4 gallons of water through the dispenser to flush out air and carbon fines. Wait for the water to run clear before use.
How do I reset the filter indicator after replacement?
On most GE Profile models, press and hold the Reset or Filter button for 3 seconds until the indicator light turns green. Refer to your refrigerator manual for exact steps.
What is the water pressure requirement for the filter?
The filter operates best with water pressure between 20-120 psi. Low pressure may reduce flow rate.
Can I use the PNSF35B filter for well water?
Yes, the filter can treat well water, but it is not designed to remove bacteria or viruses. Pre-treatment may be needed for heavily contaminated well water.
Where is the filter located in my refrigerator?
The filter is typically located in the upper right corner of the fresh food compartment or in the grille base at the bottom front of the refrigerator.
Does the filter reduce fluoride?
The PNSF35B is not certified to reduce fluoride. For fluoride reduction, you may need a specialized filter.
User questions about Profile PNSF35B GE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water filter in PDF format for free! Find your manual Profile PNSF35B - GE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Profile PNSF35B by GE.
USER MANUAL Profile PNSF35B GE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GE
Model : Profile PNSF35B
Category : Water filter