CTK20PCEDRIVE - Screwdriver StarTech.com - Free user manual and instructions
Find the device manual for free CTK20PCEDRIVE StarTech.com in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Screwdriver |
| Model | CTK20PCEDRIVE |
| Brand | StarTech.com |
| Voltage | 20 V |
| Battery Type | Li-Ion |
| Chuck Type | Hex |
| Max Torque | 30 Nm |
| No-Load Speed | 0-600 RPM |
| Dimensions (L x W x H) | 20.3 x 5.1 x 7.6 cm |
| Weight | 0.9 kg |
| Power Source | Cordless, rechargeable |
| Charging Time | 1 hour |
| Key Features | Variable speed trigger, LED work light, forward/reverse switch |
| Included Bits | Phillips, flathead, Torx (set) |
| Maintenance | Clean after use, store in dry place, recharge battery regularly |
| Safety Features | Overload protection, lock-on button, safety grip |
| Spare Parts Availability | Battery, charger, bit set available |
| Repairability | User-replaceable battery and bits |
| Warranty | 2 years limited |
| Certifications | CE, RoHS |
| Intended Use | Light-duty screwdriving in electronics, computers, furniture |
Frequently Asked Questions - CTK20PCEDRIVE StarTech.com
How to charge the screwdriver?
Connect the charger to the battery pack and plug into a 100-240V AC outlet. The LED indicator turns red during charging and green when fully charged. Charging time is approximately 1 hour.
What bits are included?
The screwdriver comes with a set of 6 bits: Phillips #1, #2, flathead 5mm, Torx T15, T20, and a magnetic bit holder. Additional bits can be purchased separately.
Can I use this screwdriver for drilling?
This screwdriver is designed for screwdriving only, not for drilling. It lacks a hammer action and has low torque compared to drills. Use a dedicated drill for drilling tasks.
How to change the bits?
Pull the chuck collar forward, remove the current bit, insert the desired bit until it clicks, and release the collar. Ensure the bit is securely locked before use.
What is the maximum screw size?
Recommended screw sizes are up to 5mm diameter and 50mm length for softwood, and smaller for metal. Overloading may damage the screwdriver.
How to maintain the screwdriver?
After use, wipe the tool clean with a dry cloth. Avoid water. Store in a dry, dust-free place. Recharge battery every 3 months if not used. Do not disassemble except for battery replacement.
Why does the screwdriver stop suddenly?
Built-in overload protection may activate if the tool is overloaded or battery is low. Release the trigger, wait a few seconds, and resume. If problem persists, recharge battery.
Is the battery replaceable?
Yes, the battery pack is removable and can be replaced with a compatible 20V StarTech.com battery. Contact support for purchase.
Can I use the screwdriver while charging?
No, the screwdriver cannot be used while plugged into the charger. It is cordless and uses battery power only.
What safety precautions should I take?
Always wear safety glasses. Keep hands away from rotating bits. Disconnect battery when not in use. Do not expose to moisture. Use only bits rated for power tools.
User questions about CTK20PCEDRIVE StarTech.com
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Screwdriver in PDF format for free! Find your manual CTK20PCEDRIVE - StarTech.com and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CTK20PCEDRIVE by StarTech.com.
USER MANUAL CTK20PCEDRIVE StarTech.com
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : StarTech.com
Model : CTK20PCEDRIVE
Category : Screwdriver