ZWA 380 - Washing machine Zanussi-Electrolux - Free user manual and instructions
Find the device manual for free ZWA 380 Zanussi-Electrolux in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Front-loading washing machine |
| Brand | Zanussi-Electrolux |
| Model | ZWA 380 |
| Dimensions (H x W x D) | 85 cm x 60 cm x 50 cm |
| Weight | Approximately 65 kg |
| Power Supply | 220-240 V, 50 Hz |
| Rated Power | 2000 W |
| Energy Consumption per Cycle | 1.2 kWh (typical) |
| Water Consumption per Cycle | 50 L (typical) |
| Spin Speed | Max 800 rpm |
| Capacity | 5 kg |
| Programs | Cottons, Synthetics, Delicates, Quick Wash, Hand Wash, Spin Only, Drain |
| Temperature Selection | Cold, 30°C, 40°C, 60°C, 90°C |
| Door Opening | Left hinged |
| Control Type | Rotary knob and push buttons |
| Display | LED indicators for cycle progress |
| Delay Start | Up to 24 hours |
| Child Lock | Yes |
| Noise Level (Wash/Spin) | 60 dB / 75 dB |
| Installation Type | Freestanding |
| Color | White |
Frequently Asked Questions - ZWA 380 Zanussi-Electrolux
How do I install the washing machine?
Refer to the installation guide. Ensure the machine is on a stable, level surface. Connect the water inlet hose to a cold water supply with a 3/4 inch thread. Attach the drain hose to a standpipe or sink. Level the machine by adjusting the feet. Remove the transport bolts at the back before first use.
What does the error code 'E10' mean?
Error code E10 indicates a water filling problem. Check that the water tap is open, the inlet hose is not kinked, and the filter in the inlet valve is clean. If the problem persists, contact service.
How do I clean the detergent drawer?
Remove the detergent drawer by pressing the release button. Wash it under warm running water to remove any detergent residues. Clean the drawer recess with a cloth. Ensure the drawer is completely dry before reinserting.
The machine is not spinning. What should I do?
Check if the machine is overloaded or if the load is unbalanced. Also ensure the drain hose is not blocked and the pump filter is clean. If the problem continues, a faulty motor or control board may be the cause.
Can I use a 30°C cycle for all fabrics?
Not all fabrics. Delicates, wool, and silk require lower temperatures (cold or 30°C) and a gentle cycle. Cottons and synthetics can handle higher temperatures. Always check garment care labels.
How often should I clean the pump filter?
Clean the pump filter every 2-3 months to prevent clogs and maintain performance. You should also clean it if the machine fails to drain or makes unusual noises.
What is the maximum spin speed?
The ZWA 380 has a maximum spin speed of 800 rpm. You can select a lower speed or no spin if needed for delicates.
How do I activate child lock?
Press and hold the 'Start/Pause' and 'Delay Start' buttons simultaneously for about 3 seconds. A key symbol will appear on the display. Repeat the process to deactivate.
Why is the door not opening after a cycle?
The door remains locked for safety while the drum is still moving or water is present. Wait 2-3 minutes after the cycle ends. If it still doesn't open, turn off the machine and unplug it for 5 minutes.
Where can I buy spare parts?
You can purchase spare parts from authorized Zanussi-Electrolux dealers or online through the official parts website. Common spare parts include door seal, belt, pump, and heating element.
User questions about ZWA 380 Zanussi-Electrolux
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual ZWA 380 - Zanussi-Electrolux and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZWA 380 by Zanussi-Electrolux.