Sarix Enhanced IME839-1ERS - Security Camera Pelco - Free user manual and instructions
Find the device manual for free Sarix Enhanced IME839-1ERS Pelco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Security Camera |
| Model | Sarix Enhanced IME839-1ERS |
| Brand | Pelco |
| Resolution | 8 MP (3840 x 2160) |
| Sensor | 1/1.8" Progressive CMOS |
| Lens | 2.8 - 12 mm varifocal, auto-iris |
| Night Vision | IR LEDs up to 30 m (98 ft) |
| Video Compression | H.264, H.265, MJPEG |
| Field of View | 100° - 30° horizontal depending on zoom |
| Power Supply | PoE (802.3af), 12 VDC optional |
| Power Consumption | 12 W typical |
| Ingress Protection | IP66 (weatherproof) |
| Dimensions (H x W x D) | 120 mm x 85 mm x 85 mm |
| Weight | 1.2 kg (2.65 lbs) |
| Operating Temperature | -40°C to 60°C (-40°F to 140°F) |
| Main Functions | Motion detection, tamper alarm, privacy masking, audio support |
| Network Interface | RJ-45 10/100/1000 Mbps |
| Storage | MicroSD slot (max 256 GB) |
| Security | HTTPS, IEEE 802.1X, IP filtering, password protection |
| Maintenance | Clean lens with microfiber cloth; firmware updates via web interface |
| Spare Parts | Replacement lens, IR board, power supply (contact Pelco support) |
Frequently Asked Questions - Sarix Enhanced IME839-1ERS Pelco
How do I reset the camera to factory defaults?
Press and hold the reset button on the camera for 10 seconds using a paperclip. The camera will reboot and restore default settings.
What is the default IP address of the camera?
The default IP address is 192.168.0.100. You can discover it using the Pelco Device Utility software.
Can I mount the camera outdoors?
Yes, the camera has an IP66 rating, making it weather-resistant for outdoor use.
How do I access the camera remotely?
Ensure the camera is connected to your network and set up port forwarding on your router. Then access via web browser using the camera's WAN IP or through Pelco's cloud service.
What power supply does the camera need?
The camera supports PoE (802.3af) for power and data over a single Ethernet cable, or 12 VDC input as an alternative.
Why is the night vision not working?
Check that the IR cut filter is functioning and the camera is set to Night Mode. Also ensure the IR LEDs are not obstructed and the camera is not facing a bright light source.
How do I update the firmware?
Download the latest firmware from the Pelco website, log into the camera's web interface, go to Maintenance > Firmware Upgrade, and upload the file.
What is the maximum supported microSD card size?
The camera supports microSD cards up to 256 GB for local recording.
How do I clean the camera lens?
Use a soft, lint-free microfiber cloth slightly dampened with lens cleaning solution. Do not use abrasive materials or harsh chemicals.
Can I set up motion detection zones?
Yes, via the web interface under Events > Motion Detection. You can draw up to 4 custom zones with adjustable sensitivity.
User questions about Sarix Enhanced IME839-1ERS Pelco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual Sarix Enhanced IME839-1ERS - Pelco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Sarix Enhanced IME839-1ERS by Pelco.
USER MANUAL Sarix Enhanced IME839-1ERS Pelco
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pelco
Model : Sarix Enhanced IME839-1ERS
Category : Security Camera