SW-515-RX - Receiver WyreStorm - Free user manual and instructions
Find the device manual for free SW-515-RX WyreStorm in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | HDMI/AV Receiver |
| Brand | WyreStorm |
| Model | SW-515-RX |
| Dimensions (W x D x H) | 435 x 250 x 44 mm (19-inch rack mountable) |
| Weight | 2.3 kg |
| Power Supply | 100-240V AC, 50/60Hz |
| Power Consumption | 15W (max) |
| Video Inputs | 1x HDMI (loop-through) |
| Video Outputs | 1x HDMI |
| Supported Resolutions | 480i/p, 576i/p, 720p, 1080i/p, 4K@60Hz |
| Control | IR remote, RS-232, TCP/IP |
| Audio Support | PCM, Dolby Digital, DTS, up to 7.1 channels |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 90% RH (non-condensing) |
| Maintenance | Clean with a soft, dry cloth. Do not use liquids. |
| Safety | Do not expose to rain or moisture. Use only provided power adapter. |
| Spare Parts & Repairability | Contact WyreStorm support for spare parts. No user-serviceable parts inside. |
| Intended Use | Indoor use only |
Frequently Asked Questions - SW-515-RX WyreStorm
How do I connect the SW-515-RX to my display?
Connect an HDMI cable from the receiver's HDMI output to your display's HDMI input. Ensure the source device is connected to the transmitter.
What power adapter does the SW-515-RX require?
The receiver uses a 12V DC power adapter with at least 1A output. Use only the adapter provided by WyreStorm.
Can the SW-515-RX support 4K resolution?
Yes, it supports 4K@60Hz with HDCP 2.2, provided the source and display also support 4K.
How do I control the receiver via RS-232?
Connect a serial cable to the RS-232 port. Use 9600 baud, 8 data bits, no parity, 1 stop bit. Commands are available in the manual.
What should I do if there is no video output?
Check all HDMI connections, ensure the source is powered on, and verify the receiver is receiving power (LED indicator). Try a different HDMI cable.
How do I update the firmware?
Firmware updates are performed via the USB port or network. Download the latest firmware from WyreStorm's website and follow the instructions.
Can I use the SW-515-RX with a third-party transmitter?
No, the receiver is designed to work only with WyreStorm SW-515-TX or compatible transmitters. Using other devices may cause compatibility issues.
What is the maximum cable length for HDMI?
For 4K signals, use high-speed HDMI cables up to 15 meters. For 1080p, up to 30 meters. Active cables can extend longer.
How do I reset the receiver to factory settings?
Press and hold the reset button on the rear panel for 10 seconds until the LED blinks rapidly. The receiver will reboot with default settings.
Is the SW-515-RX rack mountable?
Yes, it comes with rack ears and fits a standard 19-inch rack. Allow at least 1U of space for ventilation.
User questions about SW-515-RX WyreStorm
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual SW-515-RX - WyreStorm and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SW-515-RX by WyreStorm.
USER MANUAL SW-515-RX WyreStorm
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : WyreStorm
Model : SW-515-RX
Category : Receiver