HD-450T - Receiver MVision - Free user manual and instructions
Find the device manual for free HD-450T MVision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Satellite Receiver |
| Model | HD-450T |
| Brand | MVision |
| Dimensions (W x D x H) | 28 cm x 18 cm x 5 cm |
| Weight | 0.8 kg |
| Power Supply | 12 V DC, 1 A |
| Video Output | HDMI, Composite (RCA) |
| Audio Output | HDMI, Optical, Analog (RCA) |
| Tuner | DVB-S2, 950–2150 MHz |
| Channel Memory | 4000 Channels |
| Supported Video Resolutions | 720p, 1080i, 1080p |
| USB Port | Yes, for multimedia playback (MP4, AVI, MKV) |
| Card Slot | Yes, for CI+ module (pay TV) |
| Ethernet Port | Yes, for IPTV and firmware updates |
| Remote Control | Yes, with batteries included |
| Power Consumption | Max 15 W, Standby < 1 W |
| Frequency Range | 950–2150 MHz |
| LNB Power | 13/18 V, 500 mA max |
| Operating Temperature | 0°C to 45°C |
| Maintenance | Keep dry, clean with soft cloth, avoid moisture |
| Safety | Only use supplied adapter, unplug during storms |
| Spare Parts / Repairability | Contact MVision support for power adapter, remote |
| General Information | Full HD satellite receiver with multimedia support |
Frequently Asked Questions - HD-450T MVision
How to connect the HD-450T to my TV?
Use an HDMI cable to connect the receiver to your TV. Alternatively, use RCA composite cables (yellow, white, red) if your TV does not support HDMI.
How to scan for satellite channels?
Go to Menu > Installation > Automatic Scan. Select the correct satellite and transponder, then press OK. The receiver will search for all available channels.
Why is my remote control not working?
Check if the batteries are inserted correctly (polarity) and are not depleted. Ensure there are no obstacles between the remote and the receiver. If still not working, try resetting the remote by removing batteries for 30 seconds.
Can I record shows on the HD-450T?
The HD-450T does not have a built-in recording function. However, if it has a USB port, you can connect a USB drive and use the PVR feature (if supported) by scheduling recordings in the EPG.
What to do if there is no signal?
Check the dish alignment and LNB cable connection. Ensure the LNB is working and the correct satellite is selected in Installation settings. Also verify the LNB power is enabled in the menu.
How to update the firmware?
Download the latest firmware from the MVision website to a USB drive. Insert the USB into the receiver, go to Menu > Software Update, and select the file. Do not turn off the power during update.
Can I use the receiver with any satellite dish?
Yes, as long as the dish has a standard LNB (single or universal) and is aligned to the satellite you want. The receiver works with most Ku-band LNBs.
How to reset the receiver to factory settings?
Go to Menu > Installation > Factory Default. Enter the password (default 0000) and confirm. This will erase all channels and settings.
What is the default password?
The default password for parental lock and system settings is 0000. You can change it in the System Settings menu.
How to watch pay-TV channels?
Insert a CAM module (Conditional Access Module) and your smart card into the CI+ slot. The receiver will decrypt the channels if the subscription is active.
User questions about HD-450T MVision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual HD-450T - MVision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HD-450T by MVision.
USER MANUAL HD-450T MVision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MVision
Model : HD-450T
Category : Receiver