JL Audio

SGR-8W7-ROD-RP - Subwoofer JL Audio - Free user manual and instructions

Find the device manual for free SGR-8W7-ROD-RP JL Audio in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice JL Audio SGR-8W7-ROD-RP - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Subwoofer Driver
Size 8 inches
RMS Power Handling 750 Watts
Peak Power Handling 1500 Watts
Impedance Dual 4-Ohm (configurable to 2 or 8 Ohm)
Frequency Response 22 Hz – 250 Hz
Sensitivity 84.5 dB @ 1W/1m
Voice Coil Diameter 3 inches
Mounting Depth 6.06 inches (154 mm)
Cutout Diameter 7.25 inches (184 mm)
Sealed Enclosure Volume (recommended) 0.625 cubic feet (17.7 L)
Ported Enclosure Volume (recommended) 1.25 cubic feet (35.4 L)
Motor Structure Floating Cone Attach Method (FCAM)
Cone Material Woven Glass Fiber Composite
Surround Material Progressive Roll Foam
Spider Design Flat Elevated Spider with Cooling
Net Weight 16.5 lbs (7.5 kg)
Maintenance and Cleaning Wipe with dry cloth; do not use solvents. Keep cone and surround free of dust.
Safety Cautions Ensure amplifier output does not exceed subwoofer RMS rating. Use proper enclosure volume to avoid over-excursion.
Spare Parts and Repairability Contact JL Audio authorized service centers for recone or voice coil replacement.
General Information High-performance subwoofer for car audio systems. Break-in period recommended: 20 hours at moderate level.

Frequently Asked Questions - SGR-8W7-ROD-RP JL Audio

What is the recommended enclosure for the SGR-8W7-ROD-RP?
For sealed enclosures, use 0.625 ft³ (17.7 L). For ported, use 1.25 ft³ (35.4 L) with a tuning frequency of 32 Hz.
What is the power handling of this subwoofer?
The RMS power handling is 750 Watts and peak power handling is 1500 Watts.
What impedances can I wire to?
The dual 4-ohm voice coils can be wired in series for 8 ohms or parallel for 2 ohms.
What is the mounting depth and cutout size?
Mounting depth is 6.06 inches (154 mm) and cutout diameter is 7.25 inches (184 mm).
Is there a break-in period?
Yes, JL Audio recommends a 20-hour break-in period at moderate listening levels to fully loosen the suspension.
Can I use this subwoofer in a sealed box?
Absolutely. The recommended sealed box volume is 0.625 ft³. It will provide tight, accurate bass.
What is the frequency response?
The frequency response is 22 Hz – 250 Hz (±3 dB), making it suitable for deep bass.
How do I clean the subwoofer?
Use a dry soft cloth to wipe the cone and surround. Avoid liquids or chemicals that may damage the materials.
Where can I get it repaired?
Contact an authorized JL Audio service center for recone or voice coil repairs. Do not attempt DIY repairs.
Does the SGR-8W7-ROD-RP come with a warranty?
Yes, JL Audio offers a 2-year limited warranty from the date of purchase. Retain your receipt.

User questions about SGR-8W7-ROD-RP JL Audio

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Subwoofer in PDF format for free! Find your manual SGR-8W7-ROD-RP - JL Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SGR-8W7-ROD-RP by JL Audio.

USER MANUAL SGR-8W7-ROD-RP JL Audio

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : JL Audio

Model : SGR-8W7-ROD-RP

Category : Subwoofer