WFO 3T132 X - Dishwasher WHIRLPOOL - Free user manual and instructions
Find the device manual for free WFO 3T132 X WHIRLPOOL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Dishwasher |
| Brand | Whirlpool |
| Model | WFO 3T132 X |
| Color | Stainless Steel |
| Dimensions (H x W x D) | 85 cm x 60 cm x 57 cm |
| Weight | Approximately 47 kg |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Capacity (Place Settings) | 14 |
| Energy Efficiency Class | A+ |
| Water Consumption per Cycle | 10 L |
| Energy Consumption per Cycle | 0.93 kWh |
| Noise Level | 47 dB(A) |
| Number of Programs | 6 |
| Programs | Eco, Intensive, Normal, Quick, Glass, Soak |
| Drying System | Static Drying |
| Water Fill | Cold Water Only |
| Controls | Electronic Push Button |
| Display | LED Time Remaining |
| Safety Features | Flood Protection, Child Lock |
| Cleaning & Maintenance | Self-cleaning filter, periodic rinse aid refill |
| Spare Parts Availability | 7 years after last unit produced |
| Repairability Index | 8.1/10 |
Frequently Asked Questions - WFO 3T132 X WHIRLPOOL
How do I install the Whirlpool WFO 3T132 X dishwasher?
Ensure the installation site has a water supply and drain connection. Level the unit using adjustable feet. Connect the inlet hose to the cold water supply. Plug into a grounded socket. See the manual for detailed step-by-step instructions.
What are the available wash programs?
The dishwasher offers 6 programs: Eco (energy-saving), Intensive (heavy soil), Normal (everyday), Quick (short cycle), Glass (delicate items), and Soak (pre-rinse).
How do I clean the filter?
Turn the filter counterclockwise to remove it. Rinse under running water and scrub with a soft brush. Reinstall by aligning and turning clockwise until locked. Clean regularly to maintain performance.
Why is my dishwasher not draining?
Check if the drain hose is kinked or clogged. Clean the filter. Ensure the garbage disposal (if connected) is clear. Run a short cycle to verify drainage. If problem persists, consult a technician.
Can I use regular dish soap?
No, use only dishwasher detergent formulated for automatic dishwashers. Regular soap creates excessive suds and may damage the unit.
What does the 'Add Rinse Aid' indicator mean?
It indicates the rinse aid reservoir is low. Open the dispenser lid, fill with rinse aid to the max line, and close. Adjust the setting if needed for better drying.
How do I enable the child lock?
Press and hold the Start/Reset button for 3 seconds until a beep sounds. Repeat to disable. The child lock prevents accidental button presses.
What is the noise level of this dishwasher?
The Whirlpool WFO 3T132 X operates at 47 dB(A), which is quiet enough for conversation while running.
Can I delay the start of a cycle?
Yes, press the Delay Start button (if available) to set a delay from 1 to 12 hours. The dishwasher will start automatically at the set time.
How do I troubleshoot an error code?
Refer to the manual's error code table. Common codes: E1 (water intake), E4 (drainage), E5 (heating). Reset by turning off power for 1 minute. If recurring, call service.
User questions about WFO 3T132 X WHIRLPOOL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual WFO 3T132 X - WHIRLPOOL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WFO 3T132 X by WHIRLPOOL.
USER MANUAL WFO 3T132 X WHIRLPOOL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : WHIRLPOOL
Model : WFO 3T132 X
Category : Dishwasher