LT-32X887 - Television JVC - Free user manual and instructions
Find the device manual for free LT-32X887 JVC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED TV |
| Screen Size | 32 inches (81 cm) |
| Resolution | HD Ready (1366 x 768 pixels) |
| Refresh Rate | 60 Hz |
| Dimensions (without stand) | 732 x 432 x 74 mm |
| Dimensions (with stand) | 732 x 487 x 207 mm |
| Weight (without stand) | 4.5 kg |
| Weight (with stand) | 4.7 kg |
| Power Consumption (typical) | 45 W |
| Standby Power Consumption | < 0.5 W |
| Input Voltage | 100-240 V AC, 50/60 Hz |
| Connectivity | 2 x HDMI, 1 x USB, 1 x RF, 1 x AV, 1 x VGA (D-Sub) |
| Audio Output | 2 x 8 W speakers, 1 x Headphone jack |
| Tuner | DVB-T/T2, DVB-C |
| Smart TV | No |
| Wall Mount VESA | 200 x 200 mm |
| Energy Class | A+ |
| Cleaning | Use a soft, dry cloth. Do not use liquid cleaners. |
| Safety | Do not expose to rain or moisture. Unplug during lightning storms. |
| Spare Parts & Repairability | Contact JVC service center for genuine parts. Repair should be done by qualified personnel. |
Frequently Asked Questions - LT-32X887 JVC
How do I reset my JVC LT-32X887 TV to factory settings?
Press the Menu button on the remote, go to Settings > System > Reset, then confirm with OK. The TV will restart with default settings.
Why is there no sound from my TV?
Check if the volume is muted or too low. Ensure external speakers are properly connected. Try a different audio source or perform a sound reset in the settings menu.
Can I mount the LT-32X887 on a wall?
Yes, the TV supports VESA 200x200 mm wall mounts. Use appropriate screws and ensure the wall can support the TV's weight (4.5 kg without stand).
How do I connect external devices like a gaming console?
Use an HDMI cable to connect the console to one of the TV's HDMI ports. Then select the corresponding input source using the Source button on the remote.
What is the screen resolution of the JVC LT-32X887?
The TV has an HD Ready resolution of 1366 x 768 pixels, offering clear picture quality for standard and high-definition content.
How do I clean the TV screen?
Turn off the TV and unplug it. Use a soft, dry microfiber cloth to gently wipe the screen. Do not use any chemical cleaners, water, or abrasive materials.
Why is my remote control not working?
First, check the batteries and replace them if needed. Ensure there is no obstruction between the remote and the TV sensor. If the issue persists, try pairing the remote by holding the OK button for 5 seconds.
Can I record TV programs on a USB drive?
No, the LT-32X887 does not support direct USB recording. You can use an external recorder connected via HDMI or other methods.
How do I update the TV's firmware?
Since this model is not a Smart TV, firmware updates are not typically available. However, check the JVC support website for any updates via USB if applicable.
What should I do if the TV turns off by itself?
This could be due to the auto power-off feature enabled in settings. Navigate to Settings > System > Eco Mode and disable auto-off. If the problem continues, check for overheating or contact support.
User questions about LT-32X887 JVC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Television in PDF format for free! Find your manual LT-32X887 - JVC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LT-32X887 by JVC.
USER MANUAL LT-32X887 JVC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JVC
Model : LT-32X887
Category : Television